fluffie Posted April 2, 2009 Share Posted April 2, 2009 hey guys im new to the fourms but not new to nissans i have a 92 pathy and the auto door locks do not work. u can hear the relay i think it is in hte back on the drivers side clicking when u hit it but nothing else happens anyone have any ideas. Link to comment Share on other sites More sharing options...
fluffie Posted April 17, 2009 Author Share Posted April 17, 2009 bump Link to comment Share on other sites More sharing options...
edicer2 Posted April 17, 2009 Share Posted April 17, 2009 so when you push the lock button you just hear a click noise? what happens when you push the drivers side one down manuallly? do they all lock then? If so then take the door lock buttons out and clean the contacts maybe its just corroded or something. Also see if there are any fueses somewhere i havent looked at mine in a while.Do you have keyless entry? Link to comment Share on other sites More sharing options...
fluffie Posted April 18, 2009 Author Share Posted April 18, 2009 i dont have keyless entryyea when u push the lock button the relay i guess is what it is in the back drivers side clicks ubt nothin happens. when ever i push the door lock down it just locks that one door i have checked fuses and havent found any that are blown so i had no clue were to start from their Link to comment Share on other sites More sharing options...
headpeace Posted May 13, 2009 Share Posted May 13, 2009 my auto door locks have just failed. replaced the 10 amp fuse and they worked for a day or 2 now back to not working. Just so happens about the same time my keyless entry quit working too. I went through the TSB that was pinned and all works, the alarm still works, reporgrammed my keyless entry but still a challenge to get my doors unlocked. Anyone have a tip? Link to comment Share on other sites More sharing options...
MaxRX7 Posted May 13, 2009 Share Posted May 13, 2009 i dont have keyless entryyea when u push the lock button the relay i guess is what it is in the back drivers side clicks ubt nothin happens. when ever i push the door lock down it just locks that one door i have checked fuses and havent found any that are blown so i had no clue were to start from their same thing happen to me a few years ago. the clicking is from the relay that is stuck. go to the back drivers side and pull off the plastic side panel. there you'll see a gray box with a wiring harness. it's called a door lock timer or something like that. basically you'll have to replace it by (buying a new one, replacing the relay inside, or taking your chance with one out of the junkyard). Link to comment Share on other sites More sharing options...
MaxRX7 Posted May 13, 2009 Share Posted May 13, 2009 my auto door locks have just failed. replaced the 10 amp fuse and they worked for a day or 2 now back to not working. Just so happens about the same time my keyless entry quit working too. I went through the TSB that was pinned and all works, the alarm still works, reporgrammed my keyless entry but still a challenge to get my doors unlocked. Anyone have a tip? same thing happened with you. bascially when a relay is dying it doesn't go out 100%, it might still click on and off a few more times. like if you were to tap on the gray module maybe it'll work for another week or so. the alarm is on a seperate module that's why it is not affected. you shouldn't have to reprogram your remote. Link to comment Share on other sites More sharing options...
edicer2 Posted May 13, 2009 Share Posted May 13, 2009 what do these relays look like i might have some from my old pathy yet idk if i yanked them out yet. Link to comment Share on other sites More sharing options...
94extreme Posted May 13, 2009 Share Posted May 13, 2009 it could be just connection issue.. there are a few threads around here with all the possibilities discussed. Link to comment Share on other sites More sharing options...
headpeace Posted May 14, 2009 Share Posted May 14, 2009 I'm having trouble finding a grey box back there, is it towards the front of the opening? how big is it? up or down? pic? Link to comment Share on other sites More sharing options...
headpeace Posted May 15, 2009 Share Posted May 15, 2009 allright pulled the whole panel off, which box am I looking for there's a few back there Link to comment Share on other sites More sharing options...
headpeace Posted May 15, 2009 Share Posted May 15, 2009 I just found a great link for this problem http://www.q45.org/timers.html Link to comment Share on other sites More sharing options...
headpeace Posted May 16, 2009 Share Posted May 16, 2009 just got done and it worked like a mofo, all the locks work and I've got my alarm back Link to comment Share on other sites More sharing options...
94extreme Posted May 16, 2009 Share Posted May 16, 2009 cool! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now