Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

RUST and Cosmetics

Nytrosfinder

By Nytrosfinder,
in 86.5-89 WD21 Pathfinders

 Share

Recommended Posts

Nytrosfinder
NPORA Old-Timer

Nytrosfinder

Posted
  • Author
Posted
I removed it in the cargo area, on the floor pans I left the really stuborn stuff. For the cargo floor I just smacked it with a rubber mallet and it cracked apart for a good bit of it. Then I took a scraper and the mallet and chiseld the rest off.

 

 

Rhino Liner is the best.... I am thinking about putting that inside my pathfinder once I am done fixing the rust... the only problem I got is that I have subs and I don't know how it will sound... It might rattle or echo or do something weird... all I know is that if my subs rattle my car... at least the inside will hold together...

 

Has anyone ever though of Rhino lining the dash accent pieces? I wonder how or if that will look cool or not....

Link to comment
Share on other sites
GrimGreg NPORA Old-Timer

GrimGreg

Posted
Posted
Rhino Liner is the best....

 

I like Line-X a lot better, but neither is a product you can buy and apply at home. I've used Herculiner and Duraliner on my trucks, the Herculiner is much more durable, and has a lot more and larger imbeded rubber particles.

Link to comment
Share on other sites
DM1975 NPORA Newbie

DM1975

Posted
Posted

I plan on putting Herculiner down on my floorboards when I finish welding up the rust holes. I have used it before on a Chevy build and liked it a lot. I just have to get them dang holes patched. My wire welder is a piece of junk with only a high and low setting on the heat and it keeps blowing holes through the metal and I don't think my arc welder would do much more than act like a plasma cutter on that sheet metal.

Link to comment
Share on other sites
Nytrosfinder
NPORA Old-Timer

Nytrosfinder

Posted
  • Author
Posted

Once i Finish fixing the holes on my floor pan I will throw some on, then the Lowest 1/2 of my rocker panel I will do it also.... and I am thinking about maybe hitting my frame if I have enough... Friend bought a kit and used a dab or 2 and said he would just basically give me the rest so I am gonna use it for some stuff and hopefully it works out well....

Link to comment
Share on other sites
  • 10 years later...
  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...