edicer2 Posted February 11, 2009 Share Posted February 11, 2009 I was looking at a flowmaster 40 series to replace my stock muffer. which ones of these on this site would i use for the least about of work? is our stock exhuast 2.5" and does out muffler go center to center? http://www.completeexhaust.com/index.php?cPath=43 Link to comment Share on other sites More sharing options...
Nismojunky Posted February 11, 2009 Share Posted February 11, 2009 no i believe our exaust is 2.25 and its offset to center well thats what i got when i put my stainless system on Link to comment Share on other sites More sharing options...
MY1PATH Posted February 11, 2009 Share Posted February 11, 2009 stock wd21 exhaust is 1.875" (almost 2") and its a center/ offset prolly about 18" long Link to comment Share on other sites More sharing options...
Nismojunky Posted February 11, 2009 Share Posted February 11, 2009 i stand corrected Link to comment Share on other sites More sharing options...
edicer2 Posted February 11, 2009 Author Share Posted February 11, 2009 damn thats tiny haha i think my z with the same motor has 2.25 maybe not then but ok so i need to get a 2.0" muffler then? Link to comment Share on other sites More sharing options...
edicer2 Posted February 11, 2009 Author Share Posted February 11, 2009 well i guess for the price the midas guy quoted me 120 bucks or so for the muffler and install and he has whati need already so i guess ill just go there and let him deal with it it will cost the same either way it looks like. Link to comment Share on other sites More sharing options...
Precise1 Posted February 11, 2009 Share Posted February 11, 2009 IIRC 2" is fine for stock and there is a split opinion on 2.25" or 2.5" if you have headers, high flow cat, 'performance' muffler, etc. I plan to run 2.25" with the 3 mods... B Link to comment Share on other sites More sharing options...
edicer2 Posted February 11, 2009 Author Share Posted February 11, 2009 yeah i probably wont do either of them I tend to think this be my last big upgrade until i get the 300zx done and maybe a down payment on a house. maybe do a body lift in the future before all said and done idk yet Link to comment Share on other sites More sharing options...
foxtrot044 Posted February 15, 2009 Share Posted February 15, 2009 i put the flowmaster 40 series on my 95 pathy. I think the part number is 942041. It sounds pretty good i think but would be way better if the piping was larger diameter. If you got the money, i would recomend a high flow cat while they doin the muffler. Link to comment Share on other sites More sharing options...
edicer2 Posted February 15, 2009 Author Share Posted February 15, 2009 well i took advise i saw your old thread where you mentioned that. I ended up cutting my cat off and getting a flowmaster 40 2.25" and a air intake exhuast plus air intake equals one bad ass sound! Plus huge power difference lol Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now