DavefromOZ Posted September 6, 2009 Share Posted September 6, 2009 Get Adam around and tear his apart Link to comment Share on other sites More sharing options...
jadm4x4 Posted September 6, 2009 Share Posted September 6, 2009 Get Adam around and tear his apart didnt get his no before he went Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 6, 2009 Share Posted September 6, 2009 I've got it, pretty sure he wouldnt mind me giving it to you Link to comment Share on other sites More sharing options...
jadm4x4 Posted September 6, 2009 Share Posted September 6, 2009 who the F@#k wires in an alarm by twisting the frign wires. bloody hell..... at the seat belts are swaped. wheel carrier. roof console and in the middle of alarm and duel battery Link to comment Share on other sites More sharing options...
jadm4x4 Posted September 6, 2009 Share Posted September 6, 2009 what switches run from the center console? Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 6, 2009 Share Posted September 6, 2009 Mine has headlight washer switch, driving light switch & sport/touring shock switch Link to comment Share on other sites More sharing options...
maccdaddy Posted September 6, 2009 Share Posted September 6, 2009 Good to see your getting so much done so easily Matt. I'll PM you my number now. Dave, the SAAS hood scoops at work look pretty good considering the price is only about $20, so who cares even if it does break. There's also a universal catch-can setup for $50 which has a nice chrome can and all the tubing, would make your job a bit easier. Link to comment Share on other sites More sharing options...
maccdaddy Posted September 6, 2009 Share Posted September 6, 2009 Just found this Dave: http://www.exploroz.com/Forum/Topic/29080/...el_Engines.aspx May want to re-think doing the catch-can. Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 6, 2009 Share Posted September 6, 2009 Just found this Dave:http://www.exploroz.com/Forum/Topic/29080/...el_Engines.aspx May want to re-think doing the catch-can. I will probably run 1" lines, the problem he had was the 1/4" lines that the can came with. I know quite a few guys that run cans on their 3l TD Patrols with great effect. Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 6, 2009 Share Posted September 6, 2009 I've been chatting to Geordie4X4 tonight on perth4x4, he used to have a Terry and knows them inside and out. He ran an oil catch can on his without any problems and now runs one on his Patrol, as long as you use the same size lines that came with the truck originally you will be ok. as there is no more pressure build up than there would be without it. He also blocked off his EGR valve, which I may do eventually. Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 6, 2009 Share Posted September 6, 2009 How goes the re-wire mate? Hopefully you got a fair bit sorted yesterday. Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 6, 2009 Share Posted September 6, 2009 Also, did you call the bloke about the plates? Link to comment Share on other sites More sharing options...
jadm4x4 Posted September 6, 2009 Share Posted September 6, 2009 couldnt get hold of him. will try again this morning Link to comment Share on other sites More sharing options...
jadm4x4 Posted September 7, 2009 Share Posted September 7, 2009 he handed the plates in last week. dam. but friging hell wangara 4x4 wreckers wanted 145 fro a center console. and it was frign red. but the aternator bracket for 45 i can live with. wont seperate the "turbo pipe" from the engine but only wanted 450 for a full motor.......hhhhmmmmmm Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 7, 2009 Share Posted September 7, 2009 hopefully i will get my cooler set up this weekend, then all you will need is the piece at the entry of the pipe Link to comment Share on other sites More sharing options...
jadm4x4 Posted September 7, 2009 Share Posted September 7, 2009 i sent in an enquirey to perth 4wd center. see what they come up with. if not its nissan Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 8, 2009 Share Posted September 8, 2009 Not sure what it would cost to get it here, but there is a wrecker in QLD with a 90 model. http://www.tradingpost.com.au/Automotive/W...ckToResult=true Link to comment Share on other sites More sharing options...
jadm4x4 Posted September 8, 2009 Share Posted September 8, 2009 hey dave. If you get a chance would you be able to give nissan a call to see how much those pipes are. If its 2oo plus i may aswell get the motor from the wrexkers couse the alterrnator comes with it aswell. For the price its not to bad Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 8, 2009 Share Posted September 8, 2009 Waiting for a call back. FYI, found this website. Lists most spare parts for all models http://nissan4u.com/parts/terrano/ Link to comment Share on other sites More sharing options...
Cyril Posted September 8, 2009 Author Share Posted September 8, 2009 Howdy all , Well mines just turned to sh$t , have done a note under my ride . Looks like it's my turn for 4by issues . I hope all is good for the rest of you . Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 8, 2009 Share Posted September 8, 2009 Crap mate, just read it. Would be just about easier/cheaper to get another Commodore and drop in new donk. Link to comment Share on other sites More sharing options...
Cyril Posted September 8, 2009 Author Share Posted September 8, 2009 Yeh , correct on the $ , but this motor has only 156k on it so will do the repairs and just cop the $ . I'm justed annoyed at myself for not knowing more about this motor as this prob would've been done moths ago . Now sh$t loads of work and time needs to be done . Link to comment Share on other sites More sharing options...
jadm4x4 Posted September 8, 2009 Share Posted September 8, 2009 thats no good at all cyril. i have spare cylinders and ey if you want them out of the new 4by. im going to put my old ones in. but with me. organised the parts through midland 4wd center. for under 200..... so thats good. ill have her back to origional before the end of the week. b2 (87) is in alot of bits now. about the only thing left under the bonnet is the motor. all the electrics im in the process of swapping over. but all is good Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 8, 2009 Share Posted September 8, 2009 Crap mate, your more motivated than me, thats for sure. Might pop up either this weekend or next weekend for a look at how she's going. Link to comment Share on other sites More sharing options...
jadm4x4 Posted September 8, 2009 Share Posted September 8, 2009 Crap mate, your more motivated than me, thats for sure. Might pop up either this weekend or next weekend for a look at how she's going. no worries. going to try pick up the parts on friday arvo so ill pretty much be home all weekend. anyone is welcome. but whoever comes im raiding a look under the dash at those wires for a few minutes......lol Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now