jadm4x4 Posted September 2, 2009 Share Posted September 2, 2009 hahahahahahhahhahaha. must be my good looks. a female served me. hey dve beter order me another 50mm lift. if i get this other one ill turn my 87 into a trailer and keep them the same height Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 2, 2009 Share Posted September 2, 2009 No worries mate, I am getting 3 x 50mm lifts done & 3 x 30mm. I still might only do a 30 yet, not sure Link to comment Share on other sites More sharing options...
maccdaddy Posted September 2, 2009 Share Posted September 2, 2009 Haha you're running out of time to make up your mind... Link to comment Share on other sites More sharing options...
jadm4x4 Posted September 2, 2009 Share Posted September 2, 2009 No worries mate, I am getting 3 x 50mm lifts done & 3 x 30mm. I still might only do a 30 yet, not sure i would check out bolt lengths first. with the bolts i got the threads arnt long enough for a 30 mm lift. you would have to see if there is a 140mm bolt. Link to comment Share on other sites More sharing options...
jadm4x4 Posted September 2, 2009 Share Posted September 2, 2009 I miss my pathy already Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 2, 2009 Share Posted September 2, 2009 But soon you could be in a Terry Link to comment Share on other sites More sharing options...
jadm4x4 Posted September 2, 2009 Share Posted September 2, 2009 But soon you could be in a Terry yeh but one thing for shure ill still love the 2 doors better.....lol its just the shape. ill have to see on perth 4x4 to see if anyone does towing on the side. rather give someone some dollars than giving it to some buisness Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 2, 2009 Share Posted September 2, 2009 yeh but one thing for shure ill still love the 2 doors better.....lol its just the shape. ill have to see on perth 4x4 to see if anyone does towing on the side. rather give someone some dollars than giving it to some buisness Hire a trailer mate, I'll tow it up for ya Link to comment Share on other sites More sharing options...
Danrocks Posted September 2, 2009 Share Posted September 2, 2009 So after installing my lift last week, my rear diff is out of alignment. didnt notice it till i got Dave"s old wheels, that have a bigger offset, and bigger 31x10.5 tyres. the tyres stick out of the front guards about 1.5 inches, and about 1.5 on the passenger rear, and 3 inches on the drivers rear. i knew something wasnt right when i had my 30x 9.5 tyres on, but the bigger tyres made it feel like the biggest bag of crap. after alot of searching, seems there is no adjustable panhard available for the terrano / pathys. spoke to a bloke today, who reckons he will check to see that the panhard is the problem, and if it is, he will measure it up, and see whats available from another vehicle, and if the bushes are different, he can make something to suit. find out friday. so im going to put my 30x9.5 inch tyres on the new rims, get an alignment, and hope the suspension guy can sort something out for the rear. looks heaps beeter with bigger tyres, even though there bald, cant wait to get some 31's with chunky tread, eventualy. might pop up on saturday and say gday, and make a nuisance of myself. Link to comment Share on other sites More sharing options...
jadm4x4 Posted September 2, 2009 Share Posted September 2, 2009 Hire a trailer mate, I'll tow it up for ya i can do that. butnot shure if the hire company will let you do it. shouldnt be hard to find a triler at a servo though. Link to comment Share on other sites More sharing options...
jadm4x4 Posted September 2, 2009 Share Posted September 2, 2009 (edited) So after installing my lift last week, my rear diff is out of alignment. didnt notice it till i got Dave"s old wheels, that have a bigger offset, and bigger 31x10.5 tyres. the tyres stick out of the front guards about 1.5 inches, and about 1.5 on the passenger rear, and 3 inches on the drivers rear. i knew something wasnt right when i had my 30x 9.5 tyres on, but the bigger tyres made it feel like the biggest bag of crap. after alot of searching, seems there is no adjustable panhard available for the terrano / pathys. spoke to a bloke today, who reckons he will check to see that the panhard is the problem, and if it is, he will measure it up, and see whats available from another vehicle, and if the bushes are different, he can make something to suit. find out friday. so im going to put my 30x9.5 inch tyres on the new rims, get an alignment, and hope the suspension guy can sort something out for the rear. looks heaps beeter with bigger tyres, even though there bald, cant wait to get some 31's with chunky tread, eventualy. might pop up on saturday and say gday, and make a nuisance of myself. no worries. has dave got youre no. got to have a look at another pathy on south side. after lunch though. and how high was the lift Edited September 2, 2009 by jadm4x4 Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 2, 2009 Share Posted September 2, 2009 (edited) Hey Dan, here is what Geordie did, he might be able to knock one up for ya http://pcoa.org.au/forum/viewtopic.php?f=21&t=465 Edited September 2, 2009 by DavefromOZ Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 2, 2009 Share Posted September 2, 2009 no worries. has dave got youre no. got to have a look at another pathy on south side. after lunch though. Yeah mate, I got the number Link to comment Share on other sites More sharing options...
jadm4x4 Posted September 2, 2009 Share Posted September 2, 2009 Hey Dan, here is what Geordie did, he might be able to knock one up for ya http://pcoa.org.au/forum/viewtopic.php?f=21&t=465 has it been posted on here yet??????? looks like a bloody good option. couse the only lifts ive seen for a pathy is a 2 inch and no one on here has said anything about it. Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 2, 2009 Share Posted September 2, 2009 Dunno mate, I might put a link in the wd21 section Link to comment Share on other sites More sharing options...
Danrocks Posted September 2, 2009 Share Posted September 2, 2009 the lift was only 2 inches. my panhard sits pretty much parallel with the diff, would be interested to know how it sits on all your rigs. i should be taking the bigger wheels and tyres off, and putting my old ones back on, cause it drives like a pig, but it looks heaps better, and a bit bigger, and its fun sliding around corners. Dave absolutely got his moneys worth out of those tyres. hey Dave, did you manage to pull that intercooler apart and swap the ends over? Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 2, 2009 Share Posted September 2, 2009 the lift was only 2 inches. my panhard sits pretty much parallel with the diff, would be interested to know how it sits on all your rigs.i should be taking the bigger wheels and tyres off, and putting my old ones back on, cause it drives like a pig, but it looks heaps better, and a bit bigger, and its fun sliding around corners. Dave absolutely got his moneys worth out of those tyres. hey Dave, did you manage to pull that intercooler apart and swap the ends over? Nah mate, they were on there when I got it 10 months ago, were pretty much rooted then. Not going to swap the tanks over, will fit it as is cos clears the firewall by heaps. Link to comment Share on other sites More sharing options...
jadm4x4 Posted September 2, 2009 Share Posted September 2, 2009 the lift was only 2 inches. my panhard sits pretty much parallel with the diff, would be interested to know how it sits on all your rigs.i should be taking the bigger wheels and tyres off, and putting my old ones back on, cause it drives like a pig, but it looks heaps better, and a bit bigger, and its fun sliding around corners. Dave absolutely got his moneys worth out of those tyres. hey Dave, did you manage to pull that intercooler apart and swap the ends over? aslong as it looks good. dont worry about anything else....lol Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 2, 2009 Share Posted September 2, 2009 Here ya go Dan Link to comment Share on other sites More sharing options...
Danrocks Posted September 2, 2009 Share Posted September 2, 2009 I hate that yours is still lifted more than mine. my panhard doesnt even sit as high as yours, so i dont understand why it would pull my diff out of line, maybe i stuffed something up, or there is a problem somewhere else. Link to comment Share on other sites More sharing options...
jadm4x4 Posted September 2, 2009 Share Posted September 2, 2009 I hate that yours is still lifted more than mine. my panhard doesnt even sit as high as yours, so i dont understand why it would pull my diff out of line, maybe i stuffed something up, or there is a problem somewhere else. something is wrong if yours sits lower than i should push the axle out on the passenger side. soething is wrong with the lift? even mine sits about the same as daves and im still on stock suspension Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 2, 2009 Share Posted September 2, 2009 I dont know if mine is a standard panhard either mate, like I said Sunday, thats the problem with buying an already lifted truck, I wouldnt have a clue what is done to it. I'll climb under there tomorrow night and measure how long it is if you want, it might not even be standard Link to comment Share on other sites More sharing options...
jadm4x4 Posted September 2, 2009 Share Posted September 2, 2009 just looked at mine dan at it does sit roughly along the diff. i measured mine and it 1005mm from center of bolt to center of bolt roughly Link to comment Share on other sites More sharing options...
maccdaddy Posted September 2, 2009 Share Posted September 2, 2009 might pop up on saturday and say gday, and make a nuisance of myself. Haha good luck making a nuisance of yourself, I'll put you to work on mine straight away! Link to comment Share on other sites More sharing options...
DavefromOZ Posted September 2, 2009 Share Posted September 2, 2009 Well, CV's didnt get here today, will give them a call tomorrow to see if it arrived or not. Either way I'll head up Saturday and bring up the blocks. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now