Jump to content

My RPM's are going crazy


ride4thrill
 Share

Recommended Posts

hi I have a 87 pathy, 3.0..

I have been having some problems with the RPM. When the truck is idleling my RPM goge from 1000 to 100 ant back up on its own. It almost dies on me. this is what i have done to it

 

New Plugs and wire set.

Check pump and pump presure.

New fuel filter.

new distributor cap (not the roter.)

 

Please help its killing my gas.

Link to comment
Share on other sites

Have you ran your codes????

Could be O2, MAF, TPS, EGR... Codes please... Pinned Sticky in the "How To" Section...

 

 

Mine did this awhile back, although not to this extreme, it would wander back and forth from 600 to 1200, warm or cold.

I replaced the Engine Temperature Sensor and it all went away.

 

But Casey is right, run your codes it might tell you.

Edited by Alkorahil
Link to comment
Share on other sites

Thanks for the help I ran the codes and came back fine.

 

I want to try the Temperature Sensor I went to the auto store and 3 came up

 

Ambient Air Temperature Sensor

Coolant Temperature Sensor

Ignition Air Cleaner Temperature Sensor

 

Wich one could it be?

I want to say the coolant one because it is the cheapest.

Please help one more time.

Link to comment
Share on other sites

Coolant Temperature Sensor

Its about 2.5 inches long. IT sits on top of the water intake up front on the right of the engine (drivers right). The original factory sensor should have a blue plug on the end. IT is up front and on top

 

 

Should cost about $35 from a dealership.

Assuming you have a VG30 engine the old part number is 22630-V5010 but there was a part supersession and I think the new number is 22630-51E02.

Any dealers computer will show the new part number.

The one from the dealer comes also with the copper O ring for it.

 

 

Thanks for the help I ran the codes and came back fine.

 

I want to try the Temperature Sensor I went to the auto store and 3 came up

 

Ambient Air Temperature Sensor

Coolant Temperature Sensor

Ignition Air Cleaner Temperature Sensor

 

Wich one could it be?

I want to say the coolant one because it is the cheapest.

Please help one more time.

Link to comment
Share on other sites

Coolant Temperature Sensor

Its about 2.5 inches long. IT sits on top of the water intake up front on the right of the engine (drivers right). The original factory sensor should have a blue plug on the end. IT is up front and on top

Should cost about $35 from a dealership.

Assuming you have a VG30 engine the old part number is 22630-V5010 but there was a part supersession and I think the new number is 22630-51E02.

Any dealers computer will show the new part number.

The one from the dealer comes also with the copper O ring for it.

 

 

 

The new part number for the senosr is 22630-51E02

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...