03NissanPathfinder Posted August 21, 2007 Share Posted August 21, 2007 I have a 2003 Pathfinder SE 4X4 with six spoke wheels and when I installed a set of Warn premium hubs my wheels wouldn't fit over them. Has anyone had this problem and if so how did you work around it?? thanks, scott Link to comment Share on other sites More sharing options...
Simon Posted August 21, 2007 Share Posted August 21, 2007 You'll probably have to have the rims bored out. Or buy aftermarket rims with a center bore of 100mm or larger. Link to comment Share on other sites More sharing options...
03NissanPathfinder Posted August 21, 2007 Author Share Posted August 21, 2007 You'll probably have to have the rims bored out. Or buy aftermarket rims with a center bore of 100mm or larger. Thanks for the quick reply. Do you think boring out the wheels to 100mm will affect the structural integrity? Link to comment Share on other sites More sharing options...
Simon Posted August 21, 2007 Share Posted August 21, 2007 Most likely not. Most Nissans (Wd21 Pathfinder, Hardbody, Frontier, Xterra, R50 Pathfinder) run 100mm bore on the rims. Just make sure if you go that route that you do all 4 rims, and the spare, so you can rotate your tires. Link to comment Share on other sites More sharing options...
trogdor Posted August 21, 2007 Share Posted August 21, 2007 (edited) I also have an 03 pathy you just need to get new rims, that is what I am doing. I would get the American racing teflon coated rims, they are pretty nice. and cheap $90 a rim. If you do bore them out the hubs will stick out, probably more than you would want them to I wouuld just get some new rims if its in your budget. Edited August 21, 2007 by trogdor Link to comment Share on other sites More sharing options...
Pezzy Posted August 21, 2007 Share Posted August 21, 2007 For future reference, for the next guy -- assuming they're Nissan rims -- can you post up a pic of the rims you have. Link to comment Share on other sites More sharing options...
trogdor Posted August 21, 2007 Share Posted August 21, 2007 (edited) These are the ones that I have that hub will not fit. look below Edited August 23, 2007 by trogdor Link to comment Share on other sites More sharing options...
tmorgan4 Posted August 21, 2007 Share Posted August 21, 2007 If you need a set of wheels and would like to keep it Nissan I need to get rid of some factory Pathfinder wheels off my 2000 SE. Link to comment Share on other sites More sharing options...
trogdor Posted August 21, 2007 Share Posted August 21, 2007 I am planning on getting some Teflon rims Link to comment Share on other sites More sharing options...
navygz19 Posted August 22, 2007 Share Posted August 22, 2007 These are the ones that I have that hub will not fit. http://s200.photobucket.com/albums/aa57/tr...nt=IMG_0067.jpg Here ya go... Yep, standard 03+ 17" wheels... Link to comment Share on other sites More sharing options...
stevebaz Posted August 22, 2007 Share Posted August 22, 2007 Standard 2001 SE 16 inch clear the hubs if you remove the plastic center caps. Link to comment Share on other sites More sharing options...
PDCCD Posted August 23, 2007 Share Posted August 23, 2007 (edited) That sucks so bad. I'm sorry for ya man. I hope you had back up transportation. Oh, and thanks for the heads up for others in the future. Edited August 23, 2007 by PDCCD Link to comment Share on other sites More sharing options...
nissandoms47 Posted August 23, 2007 Share Posted August 23, 2007 The ones pictured above are 16" wheels. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now