Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

When Installing the CV axles.....


Recommended Posts

Okay so I've read Dean's write-up and others on R&Ring the CV axles e.g. watching for the thrust washer, brake lines, etc. (I also downloaded the Service Manual for my rig) Is there anything else I have to watch for? I'll be putting on Warn Manual Hubs as well.

 

I was also wondering about the whole re-greaseing the CV axle.

 

What parts do I have to grease and what kind of grease? (any multi-purpose)

 

Any "Special" tools I need? I have snap-ring pliers already.

 

Please any advice would be greatly appreciated as I will rip into it this weekend. Oh yeah, how much time should I estimate for a first time try?

 

 

:confused:

Link to comment
Share on other sites

Unless you're rebuilding the CV axle, you shouldn't need to apply grease anywhere on it. The CV joints should already be greased and sealed by CV boots.

 

Why are you replacing the CV axles? Are the boots torn?

Link to comment
Share on other sites

Why are you replacing the CV axles? Are the boots torn?

 

Oh, well they've been torn for quite a while and they finally grenaded on me recently 4bying at Anza-borrego. It must have been all those washes we ran through (most of the runs). Anyway they made some loud grinding noises and at full lock it became even worst.

Link to comment
Share on other sites

I just replaced mine and it took me about an hour. I just took the three bolts off that connect the A arm to the frame and it slid out super easy.

It takes me about an hour too, but mine dont slide out super easy, Your lucky man!!

My advice is to make sure and strech befor your do it, you wont be out anything but maybe 3 minutes lol

Link to comment
Share on other sites

Um, lets see not sure what trail we took from S22 down to Pumkin patch but we also did 17 palms, 5 palms (?) and maybe 1 palm (not sure I mean it was just 1 palm) LOL :)~ We probably were doing a bunch of trials just to get to pumkin patch. I was with a 4x4 club so they were leading and I was tagging along.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...