Thorleys headers

[Guest SuperSon]

Good Morning all!

 

Does anyone have thorley headers on their automatic 93 pathy?

 

Ive searched AC and summit and the only thorley that they have is for a WD21 with manual tranny. I called thorley and they said that it wont work with auto trans but Ive seen a post somewhere before that a member has this on his 93 pathy just cant remember which forum.

 

Part number is THY-464-2-C.

 

 

 

Thanks

[SC88Pathy]

Yes they fit. The only problem is the EGR tube, most people have to modify the tube to attach it.

[Casey.T]

91 Auto.....

[nige]

95 auto with no fitment issues besides the egr tube. they do hang a little low though so watch out for rocks

[solid snake]

I can vouch for the install. No porblems at all, except extending the egr tube.

 

Here's a pic

 

[Guest SuperSon]

Thanks for the reply guys. Looking at Solids pic it seems easy enough.

 

Is it made of copper that I can easily pick up at a local hardware store and solder the extension?

 

As far as lifting the pathy either BL or SL, Does this pose a problem?

 

 

 

 

 

Thanks guys

[Casey.T]

Slick was able to get her EGR to fit without welding in a extension.... I think she used some heat with Dave and Allen to reform it to fit.... Send her a PM she will share...

 

I got a piece of tubing from a local Metal supplier $.50 and had my muffler shop weld the 3 pieces together(Beer and the shared)....

 

 

3" SL on my 91 with no issues.... BL or SL your not changing the placement of the engine in the frame rails....

[unccpathfinder]

wheelman had them on his 95 auto with no fit problems...i transplanted that into my 87 (manual) and its pretty close to the frame on the pass side so i will need to make some mods there i believe if the floorboard starts heating up but other than taht they fit nice in his 95 and my 87

[Guest SuperSon]

tHANKS guys.Ill try to send slick a pm

[Slick]

Slick was able to get her EGR to fit without welding in a extension.... I think she used some heat with Dave and Allen to reform it to fit.... Send her a PM she will share...

thomas is correct. on my 5 speed it was a tight fit but the stock EGR went back in with no mods.. just a bit of heave ho'in from me n "the boys"..... now that it's been on there a while 9a year) it goes back in no problems.. no force needed.

 

my auto pathy has BL and SL...... so i am thinkin slight mods will be needed once i get thorleys for it.