Jump to content

Cbiggy

Members
 View Profile  See their activity

  • Posts

    46

  • Joined

  • Last visited

 Content Type 

Everything posted by Cbiggy

  1. Cbiggy

    Hey, I am looking into doing this. Have you been able to find the measurements and make any of the spacers? 

  2. Cbiggy
    How did you do the skid-plate that goes up to the bumper?
  3. Cbiggy
    T
  4. Cbiggy
    Hey, I have a 2003 Pathfinder and I want to put disk brakes on the rear of the vehicle. I have a done a small amount of research, but I can't seem to find anything. If you guys could help me find everything I need for the conversion, it would be greatly appreciated by me and everyone else who wants to convert their rear brakes. If there is already a thread about this topic then my bad completely.
  5. Cbiggy
    Speaking of rear springs and spacers, I am gonna do the max all around body lift kit by sf creations for my 03 pathfinder, I am just a little confused of if I will need to get struts that are longer or if the spacers will work without anything done to the struts. I want to order the spacers this week so an answer would be highly appreciated. Thanks, Clark
  6. Cbiggy
    I am planning on getting a set of Pro Comp series 51 wheels. They are 15x8 and they have a backspacing of 3.75 in". I am just making sure these will work. By the way I do not have a lift. https://www.4wheelparts.com/Wheels/Pro-Comp-Series-51-15x8-Wheel-with-6-on-5-5-Bolt-Pattern-Gloss-black-51-5883.aspx?t_c=11&t_s=535&t_pt=101508&t_pn=PCW51-5883
  7. Cbiggy
    The opening that the air initially enters the oem intake system if that makes any sense...
  8. Cbiggy
    Sorry to bring back this dead thread but, does anybody know what the height of the oem intakes' air entry is? I want to make my own snorkel but until that I don't want to drown my first car.
  9. Cbiggy
    Thank you, I guess I'm one of the last tech noobs.
  10. Cbiggy
    hey so i joined a little bit back but I still have no idea how to start a new thread. I know not to go around starting a bunch of bs threads but I'm still stuck on how to do it. Thanks
  11. Cbiggy

    So i have a 2003 r50 Pathy and I was wondering if I were to purchase a hitch for the back that bolts on, how much rear clearance will I be losing?

    1. OH6PILOT

      OH6PILOT

      No more than 3"

       

    2. mjotrainbrain

      mjotrainbrain

      The one I have is tubular and tucks back up behind the bumper for the most part, only losing clearance at the very middle. Of course it's a solid piece, so unless you're only rock crawling, I wouldn't worry about dragging it a bit. It'll protect the bumper anyway.

  12. Cbiggy
    the wheels have a 3.75 backspace by the way. Thanks, Clark
  13. Cbiggy
    Today I am purchasing a new set of wheels they are gonna be 15x8 pro comp series 51 wheels and I was wondering if I could fit a 29.6" tire on my non lifted stock suspension 2003 R50. Also I am installing a front skidplate today for some frotection.
×
×
  • Create New...