Stpickens
-
Posts
114 -
Joined
-
Last visited
-
Days Won
17
Content Type
Profiles
Forums
Calendar
Posts posted by Stpickens
-
-
My front propeller shaft ujoints were bad. Vibration at 40 and 60 mph. Changed those out and poof gone.
Sent from my iPhone using Tapatalk
-
Got it dirty
Sent from my iPhone using Tapatalk
-
2
-
-
Did a little sightseeing. Sent from my iPhone using Tapatalk
-
3
-
-
got a little dusty today playing in the Forrest. Sent from my iPhone using Tapatalk
-
1
-
-
Did a little install on a new radio. I am very happy with how it came out. Let's see if this will last longer then the cobra that fried itself after 3 months.
Sent from my iPhone using Tapatalk
-
It measures 8 wide (along the pathfinder) 10 long. Plenty of room. Sore for the really late getting back.How big does that measure? I'm interested in doing something like this on my rig for camping and fishing
Sent from my SCH-I545 using Tapatalk
Sent from my iPhone using Tapatalk
-
sorry for the late response. Yes it is just a tarp and tent poles. And you definitely need two people to put it up.Looks good! Is it just a tarp and some poles?
Sent from my iPhone using Tapatalk
-
I would take it to a different shop. There are options out there for them you just have to look online. I have Old man Emu on my 03 pathfinder. I love them. They handle great on and off road. But I also did my springs too at the same time. You'll have it torn apart might as well change them out too.
Sent from my iPhone using Tapatalk
-
Made a cheap awning. Version 1 works but getting ideas for version 2 so 1 person can do it.
Sent from my iPhone using Tapatalk
-
4
-
-
I got 4" over what I had before. It's stiff but it sits level. I would do it it again.
Sent from my iPhone using Tapatalk
-
I have a 2003 Pathfinder LE awd and just installed the OME HD springs up front and med rear springs. I also installed fleurys 1"spacers from and rear for extra height. This set up brought me 5" over where I was with the stock sagging suspension. For shocks and struts I went with OME. I love this set up. It works really well for me. No topping out on the struts and I have yet to have binding on the cv joints.
Sent from my iPhone using Tapatalk
-
2
-
-
A little upgrade time
OME 1.75" suspension kit
1" suspension spacers
New lower control arms
New u-joints for front driveshaft
New BF Goodrich AT KO2 tires in 245-70r17
She drives so much better now. She sits 5" taller from where she was the other day.
Sent from my iPhone using Tapatalk
-
3
-
-
Well I installed my cb antenna and lead wire. Now I need to figure out how to run the whirring to the battery.
Sent from my iPhone using Tapatalk
-
2
-
-
I am very interested in hearing about this. I am going the exact same route on my 2003 le. I am hoping there isn't an issue with binding.
Sent from my iPhone using Tapatalk
-
I have the 1" HDPEs of yours up front to level my OME- great work, and thanks for working with me on the shipping.
You have the OME 2" kit and 1" spacers? Was there any binding going this route or anything that should be added to install this.
Sent from my iPhone using Tapatalk
-
I am looking into doing the old man emu lift kit with their shocks in the next couple of months. Will a 1" spacer up front and 1.5" spacer in the rear be a safe bet with reliability in the cv area. Mind you this will be my daily and adventure rig. I don't want to cause binding up too much.
Sent from my iPad using Tapatalk
-
At the parking lot at work. Almost up to the running boards.
Sent from my iPhone using Tapatalk
-
5
-
-
Its fun in the desert
Why roof rack and mounts are on the pathfinder? Got any better pics?
Sent from my iPhone using Tapatalk
-
1
-
-
I am not afraid of trimming. But I want to stay away from spacers and not have clearance issues with the struts.
Sent from my iPhone using Tapatalk
-
Ok. I will wait patiently. I like the idea of no powder coating as well.
Sent from my iPhone using Tapatalk
-
Do you have an est on cost. I like the weight savings of aluminum vs steel.
Sent from my iPhone using Tapatalk
-
I could sure use a set of these. Very nice.
Sent from my iPhone using Tapatalk
-
thanks. I didn't know what the actual backspacing actually was. Yeah I hear you on the rims. I am very happy with the way they look.If your running those stock wheels, they are 17x8, 20mm offset. The back spacing will be 5.29". Love those wheels too. Wouldn't of gotten aftermarket wheels if mine had those on it when I bought it
Sent from my iPhone using Tapatalk
-
I am curious about back spacing with the factory rims and the struts.
Sent from my iPhone using Tapatalk
What did you do to your Pathfinder today?
in The Garage
Posted
I am running 245/70-R17 with an OME 1.75" lift and 1" suspension spacers.
Sent from my iPhone using Tapatalk