maddmark1981

I'm not sure how much these should be torque at... They're not sitting perfectly in their washers so I'm gonna leave emjust threadded on and put the tires back on and adjust from on the ground Sent from my MotoG3 using Tapatalk

Sent from my MotoG3 using Tapatalk

New parts, putting them on this weekend... I got both sides... Sent from my MotoG3 using Tapatalk

Yes, this is my issue too, it only does it if I'm parallel parking or having to turn around on a tight trail...etc... Sent from my MotoG3 using Tapatalk

I was sent here by another member , I'm changing all the fluids in my 95 manual trans WD-21. I am concerned with all the different options... What should I use and how much for the transmission/transfer case? Thanks Sent from my MotoG3 using Tapatalk

Yeah it seems like you can't go by looking at the bushing itself cause the damage starts in the sleve Sent from my MotoG3 using Tapatalk

Ouch.. I replaced them but just tightened them up with the wrench as far as I could twist it on with a 1516 wrench I couldn't get my torque socket arm in that tight space Sent from my MotoG3 using Tapatalk

I have a hard time getting new parts down here Sent from my MotoG3 using Tapatalk

Awesome... Thank you Sent from my MotoG3 using Tapatalk

Passengers side Sent from my MotoG3 using Tapatalk

Drivers side complete Sent from my MotoG3 using Tapatalk

Sent from my MotoG3 using Tapatalk

Hahaha, yeah after a dozen Budweiser I'm none the wiser but at least I can salvage the rod... I'm going to get some anti seize inside that sleeve too to ensure I can remove it again... Sent from my MotoG3 using Tapatalk

this should do the trick...lol There, good as new Sent from my MotoG3 using Tapatalk

I have a lincon 225 arc but no power source hooked up here, I am renting, just moved in 6 months ago Sent from my MotoG3 using Tapatalk

Sent from my MotoG3 using Tapatalk

OK, calming down now after calling every Tom and Harry on my contact list, I'm gonna try modified! Sent from my MotoG3 using Tapatalk

I can't find any strut rods around, called part stores and JY, NO LUCK.... Um hummyupyou gotta be kidding wtf? Sent from my MotoG3 using Tapatalk

I'm no expert but this rod seems FUC$$D, and now I am too... I called the parts store, nope, don't got em, called the junk yard, nope can't get em... Wtf? Can this be modified to work? Sent from my MotoG3 using Tapatalk

Ouch Sent from my MotoG3 using Tapatalk

Here's the worse of the 2 Sent from my MotoG3 using Tapatalk

Well, its not really any different now, I'm going to try tracing those two wires from the fuseable link Sent from my MotoG3 using Tapatalk

I want to flush out my tranny and TC, what's the recommendation for oil? Sent from my MotoG3 using Tapatalk

Yeah they definitely are not flexible to human hands Sent from my MotoG3 using Tapatalk

OK, cool...thanks Sent from my MotoG3 using Tapatalk