xxLOUDOGxx

I worked for Lexus for 8 yrs. some of the 3.3 motors had a bad sludge problem due to poor pvc system. Once opened up, they looked like the classic penzoil sludge back in the day. We would clean with wire brush, break clean and a shop vac best possible. Then a new updated valve cover. Then we would drop the oil pan and replace the pick up screen. Which was normaly clogged. Then a oil change at 1k. After that. The oil should clean the rest.

its from a 2000 Honda Accord per Rick Boyer. He used the joint and the spline section. And I believe he cut the spline to length needed. Rick had the blue r50 pathfinder here in Colorado 2013 truck of the year.

I Need the front strut spacers. I emailed Krfabs with no replay about 2 weeks ago. And I have even bought some other items from them already.

looks good.

looks good

one more picture of the clean cut off. The high beam feature works also. I installed ebay hid 3k bulbs in the fog lights.

I'm about to build another pair for my daughter 01 bronze pathfinder. Thinking of blacking everything out but the shroud

mine are d2s Infiniti ballast and bulb. Ebay shroud and headlights. Infiniti FX projectors.

most local auto part store will pull codes for free

placed a order with Ashley this morning. super nice. $75.90 plus shipping.

Thank you. I did it myself<br />

Thank you, I'm going to try and place a order again soon.

Rebelord, so you where able to purchase a kit? I was going to buy all 4 for my front axles.

166-21 $12.93 new price over phone $18.25 not in stock 166.23 $13.52 new price over phone $19.60 not in stock the guy was questioning my prices and where I got them. "must be a old price sheet" even though it was from the website. http://www.rockfordcv.com/Bootkit_list_prices.htm#BK166-21

I just tried to purchase a set for my pathfinder for both axles. I went to there website and parts prices. Called them. not in stock and there prices are higher and wouldn't honor there website prices.

Once all the above is checked and balanced with no change. remove your front drive shaft. it might be getting worn and out of balance. I had it happen with mine.

I installed 4x4designes 2inch spacers front and rear with air lift bags in the rear. I mounted 4 Michelins 265/70 16 and I love the way it handles and looks. There are 4 other r50 at my work that other mechanics own and they all agree. This is the way it should of left japan.

that is bad ass

8.7 hr labor plus parts

Was it just the flang that broke off? I just bought a 01 Pathfinder for my daughter and it was broken off at the flang. I took it to a local mom and pop muffler shop. They cut the other end off and welded and small 4 inch pipe in its place for $40. I've seen this happen allot on qx4. its common.

Im a Infiniti tech. Its you Turbine Sensor. Its leaking internally and the fluid follows the wiring and alumn shielding to the lowest point, the conector. We see them on the Qx4. The sensor is a pain to replace. You normaly have to pull the transmission. Some guys will dent the hump area of the car and lower the transmision as much as possible to get the sensor out with out removing the transmision