jdubs12

how much grease should you be putting in those bearing hubs? im starting to think i didnt get enough in there with my light smear...

you guys are the bomb

Do I need any special tools for doing all this work (I love an excuse to buy tools) my buddy said I should check if I will need to press the ball joints or compression rod bushings in. I tried finding that post - will try again after class

and would you go with MOOG or raybestos professional grade?

k in keeping with the questions...should I buy a tie rod end adjusting sleeve as well? and then I guess I would get two right? also is a strut rod bushing the same as replacing the tension rod bushing? and again I should order two eh? also I since I am ordering tie rods, tie rod adjusters, centerlink and strut rod bushings should I also do the ball joints (why not blow the bank and save on shipping)... how many do I need, 2 upper and 2 lower? Does the centerlink have balljoints that need to be replaced or am I just starting to confuse myself

I have a somewhat stupid question...I am looking at the rockauto site for parts and considering buying tie rods, I can only find left hand threads, inner - and for outer right hand threads. Can I not just order two of each and they will work for both sides? They dont have right hand threads, inner etc. RAYBESTOS Part # 4011682 Professional Grade Left Hand Threads; Inner

sweet thanks guys

I have 31s, I dont know if it is necessary it is just a suggestion he made. Do you know if the calmini HD steering kit is worth the $$, or should I just order all the parts from MOOG - thanks

Hi guys, I recently bought a 95 pathfinder and am having a lot of problems with the steering/ front suspension. I barely know anything about trucks and am trying to do what I can myself so I learn... it was recently looked a by a mechanic who suggested I get new tie rods, idler arm, center link, and ball joints. My friend recommended a steering dampener as well since the tires are larger then stock... I plan on buying everything at once and devoting a chunk of my life to installing all this, but I cannot find anything on how to put in a steering dampener - currently there isnt one. Any thoughts/help?