-
Posts
323 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by sroeser01
-
-
im looking for those fender flares i need them for inspection, right now i have pacer flexy flares and those look better would like them...
-
where can i find these?
-
Just went and got royal purple synchromax manual trans fluid at the proper weight can will do a flush in the am...we'll see...
-
So now im confused again. Its finally warm here and and went out and started the truck and it ran perfect. No noise no clutch issues no nothing (stratches head) so drove it around town and threw all the gears no problems what so ever, gonna bleed the clutch because father in law says there is air in it but other than that just kinda confused why it was acting up in the cold the last two weeks
-
Im gonna try bleeding the clutch this weekend, so it wont be driven, i just checked the clutch fluid which was just dot 3 brake fluid and it was filthy, so hoping that helps but i think i defiantly need to install the flywheel i have cause i hear the teeth grind every ten starts or so.
-
Transmission flush last month, its weird its only been acting up since ive been up here in the cold, but flywheel does have a few missing teeth so i know thats the grinding i hear on the occasional start up. but i dont know why the clutch pedal sticks down still
-
just moved up to NJ from FL and am having this problem since the cold nights. When i start the truck its very hard to shift into any gear until its warmed up and im down the road and the engine is at normal temp. my flywheel needs to be replaced as i have herd grinding and had it checked by my mechanic. Entire clutch was replaced 5 years ago other than the master cylinder and slave cylinder, trying to save money so i purchased a new master and slave as well as the flywheel and can get it all installed for 325. Anyone have any thoughts or tips here just want her running smooth again and ready to 4x4
-
really dumb question, where can i get a factory service manual? thanks for the help towncivilian hows the weather down there in FL just moved from naples
-
Ive cleared them and the light comes back on immediately, still not sure what the deal is...finally got the stock hubs off tho so throwing on the warns here in a few, any help on the sensors or the circuit faults and how to tell what the problem is would be awesome all...
-
Hey all, my service soon light came on a few weeks ago and i just figured a bad O2 sensor and was too busy moving and with work and all to check it. So yesterday got out the scanner to check for codes and got 3! ****** so the codes were PO136 for O2 sensor or curcuit fault, PO335 for Crankshaft postion sensor or curcuit fault and PO500 for vehicle speed sensor or circuit fault. So my question is are all these sensors bad and need replacing or are the circuits bad and how do i tell? also any idea on repair costs if i cant figure it out. Need to pass inspection and this is kinda a problem. Any help would be awesome!
-
summit racing sells flexy plairs from pacer ive used them and others as well they look good just a pain in the ass to install. easier with wheels removed
-
was at the you pull it today and found a set in perfect condition and pulled em, im wondering how these will fit my 97 r50. I held them up to mine and they seemed to fit just fine, maybe some work bolting them on and maybe a heat gun or torch. anyone have any experience with this or tips? ill try to get em on in a day or so with pics. also now have matching head rests and working blinkers now
-
was at the you pull it today and found a set in perfect condition and pulled em, im wondering how these will fit my 97 r50. I held them up to mine and they seemed to fit just fine, maybe some work bolting them on and maybe a heat gun or torch. anyone have any experience with this or tips? ill try to get em on in a day or so with pics. also now have matching head rests and working blinkers now
-
What do you mean, are you saying i should not shift into 5th gear?? its all highway
-
Manual Tranny
-
Today did power steering flush, tranny flush, coolant flush, brake pads and rotors, headlight. Will do timing belt water pump and ac belt if i can get space in the garage. Have a full size spare and its a 8x6 uhaul ill be towing
-
Finished installing the Xterra rack...
How did you mount it...im worried about drilling holes in my roof
-
It looks good even with the xterra emblem! I was just giving you a hard time. The emblem on mine was all faded so I sanded it off and repainted it.
James
How did you mount the exterra rack, just wondering cause i have a custom rack i want to put on mine but was worried about drilling holes in the roof...Thanks!
-
Moving from South Florida (everglades area) back up to PA. 1300 miles or so i believe and am currently trying to think of everything i can to do to the truck to get it ready for the haul...any ideas? timing belt, water pump, thermostat ect, ect ideas ? dont wanna forget anything THANKS!!!
-
any one no what causes this... moving north soon and will need 4 LO. not sure if its a transfer case issue or maybe electrical, switch, blown fuse? new at all this any help would be awesome!! the 4 wheel drive works fine in both 4 hi and lo but the indicator light goes off in lo when it didnt used to...have just recently installed bigger wheels(15/8 rock crawlers) and 31x10.5 BFG AT KO tires and warn manual hubs. any one else have this happen? Thanks for any help!!
-
I installed Thule Roof rack and cross bars into the factory roof panel hooks and after several years of misuse and adding weight well over capacity the roof panel hooks have broken and the rack wont stay tight. I am now relocating for my job and purchased an aftermarket roof basket that i would need for the long move up north and for camping gear ect. I found a web site that sells replacement roof panel hooks but i dont know how to get the old ones out. Anyone have any info that might be able to shed light on this??
-
Hey guys any one have any insight into maybe an aftermarket air intake possibly cold for a 97? looking for something better than stock. any ideas?
-
Took a heat gun to my fender well to stop some rubbing, worked perfectly.
i see you installed the weapon air intake...did it improve anything? considering this mod thanks
-
own a 97 pathy and cant find fender flares that will fit this thing anywhere. Need them to pass inspection any help thanks...Sean
O2 Sensor locations
in 96-2004 R50 Pathfinders
Posted
That was such a help thanks ! i just got a code for one and wasnt sure where one of em was...sweet!