mattyrides07

NO WAY

sweet

cheers

here's one of the forum I found. http://www.nissanpat...r-drop-bracket/

thanks

cool

... but I keep coming up empty. I need to find something to fix the angle of the 5th control arm. Anyone here done this???

good work

Anyone know where I can get one for my r50???

Yeah, I updated it and it's STILL doing the same thing ARGHH

Super cool! I'm thinking that's going to be expensive though... I need a cheap way to lower it to see if it will correct the steering. "Dream like you'll live forever, but live like you'll die today." -James Dean

What's a Watts linkage??? Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

I was hoping this would be the cause for why my truck pulls to the right... "Dream like you'll live forever, but live like you'll die today." -James Dean

... the reason for my pull? I was reading that the earlier models use a Panhard drop down bracket to level out the 5th control arm. I looked and mine is at an angle like theirs were before the bracket install. Anyone done this? Know where to get one?

My R50 pulls to the right... I changed the bushings and on my final control arm (upper passenger side) I noticed the control arm couldn't mount evenly without me moving the axle. Is the panhard axle drop what is needed to FINALLY fix my rig???

I'm in the same boat as the OP, but I can't afford a newer rig yet. I'm getting to the point where I need to drop some more serious coin to keep my r50 alive and prevent further problems. I've narrowed my "newer rig" to a '10 Xterra or an '08-09 FJ. I'm just hoping my truck will get me through this summer. I had a 2000 Xterra several years back, and I HATED it for off roading! It was gutless, and I broke the computer in the dash wheeling (so I had no speedo, no odometer, no temp gauge). I only had the truck for about 2 months and I dented the oil pan MAJORILY too. I took it into the dealership and traded her!

I tried looking at the settings, but couldn't find anything. I'm using the android Samsung Galaxy 2 Skyrocket and I don't have this problem with any of the other forums I use doing this...

... first, I want to say I STOKED that we are on Taptalk now (we weren't last year when I found NPORA). second, I found out that we are on taptalk last night so I added us to my "favorites." However, when I view a thread it'll show there being "12 posts" but I will only be able to a couple of them. Anyone else have this problem?

WOO!!!

Sounds about right with your calculations "Dream like you'll live forever, but live like you'll die today." -James Dean

bye

Oh, my gosh! When I looked through the pages and saw nothing I assumed they'd been deleted so I didn't try SEARCHING!!! That just makes too much sense. Going to the shop on base and going to try knocking them out before class at 6pm! Thanks.

Anyone on the old posts about rear bushings????

What happened to all our old topics? I am going to do my rear bushings tomorrow and I can't find any of the write-ups on doing them?

... I can't wait to get them and put them in next week! I'm sick of the death wobble/ pulling and can't wait to get them fixed. My SERVICE ENGINE SOON light came on yesterday which is what kicked my butt to get them ordered. My "knock sensors" are bad... $150 for the part so, I'll be waiting. I turned off the light and am hoping for it to not return LOL