Nice186

thanks for the info but i have aftermarket cragar D window rims with a i think 4" backspacing if im correct. it rubbed on the front fenders so i trimmed the front but now the back of the front fenders are touching and that's part of the frame so i cant trim that unless i lift my truck(stock height) so maybe reindex the t-bars might fix this. thanks for the link!

http://www.ebay.com/itm/330683758872?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 found theses lol

Hey quick question I just upgraded my tires from 235/75/15 to 31x10.5 and I'm reading you can up the front by the "t-bars" what is this so call "t-bar" noob over here lol how would you lift the front end? Any photos of where this is would be awesome. Thanks in adavage!

Thanks for the info, now i know and i will look into them more now. thanks alot man!

Hmm I like this idea but this may be a dumb question but isn't there a chance that water can go though it? Like I said I'm new to this, my first time seeing this haha

Thanks for the photos but I'm not digging the red, I think black will go good with my truck, and thanks for the kit, that will come in handy Photo of my truck https://fbcdn-photos...3802_n.jpg?dl=1

Thanks for the info and yes if you have a few photos of red on red I would Love to see it. I was thinking about reprinting it black as my rims are black and I was thinking about two toning my truck(bottom black and top red) but hey you might change my mind lol

Hey guys, alright so i got a great deal on CLs for a moonvisor off a nissan pick up and i was thinking about putting it on my 94 pathfinder... now my question is how do i got about this? it looks like it all lines up with my truck but do i really need to drill holes on my roof?! does anyone else have one installed? and steps and/or photos i can see so it would make it easier for me? thanks for the help guys

Nice!!!!! I been wondering about this too!!! Thanks man! (null)

How did u make the parts of the body lift? Like what is needed to lift it? I'm new to the "lift" part. I do have a CNC machine that I can use to make parts but I wouldn't have a clue on how to start building a part to "lift" my pathy. Do you still have the blueprint or file you used if you used a CNC machine? Would love to check that out if you still have it (null)

Also what is this called? See photo (null)

How do you take the rear drums apart and how hard is it? I need to change a stud (null)

DUDE!! No lie same to me theses 2 weeks first hit by a drunk driver only dented my bumper so I fixed it and painted it then today!!! A chick On her phone him me again!! Same spot!!! I should really put like a f you bar on my rear!!

How did you prep it? What did you put in it do it won't leak?

8O << my face while scrolling down this page. Dude!!!!! Holy @!*% your truck looks kick ass!!!!!!!

Anything? Haven't pulled them out yet cause I don't want to break anything. They seem to be pretty tight when 180* flat

Thank you for the answer I'm gonna check it out. Now you need to pull right? It doesn't slide out easy?

Ok so now I'm having a lil trouble. Does the inside ( I guess the support of the retainer) has to be like this -- or like this |. (90 degrees up or 180 degrees flat?) let me kno if you still don't under stand lol, I'm trying my best to explain lol

DUDE!!!! Thank you sooooo much!!!! Omg I can't believe it that simple lol, thought I had to talk out the whole ceiling lol!!! Thank you!!!!!!!

How to do remove the rear tweeters on a 94 pathy? does the cover pop out? i bought new tweeters they are vifa Dx25TG09-04 100rms got MYSELF AN EARLY CHRISTMAS PRESENT (sorry cap lock)

That's my truck it's not "screwed" in. I Velcro it cause I never kno if I need to take it out

Let me just add this It may not be the cleanest but it gets the job done

Bro stop being a jack ass nuff said... Love the console can't wait to see the updates