giancarlo93

No problem.. Tomorrow i'll take some pics.

I had the same problem when I went to install my ARB bullbar. I have 3 inch suspension lift and 3 inch body lift in my truck. As you can see in the pictures before any modifications to the bullbar you have between 3 or 4 inch gap. What we did is that we cut the bull bar in it mounting points and weld extensions and then I cover the bottom with rhino lining. So far no problems. Here are a couple of pictures: Before After

:fireworx:

http://www.4x4offroads.com/49-inch-modifie...trol-chevy.html

Ok thanks... I just saw it

I dont see it at there webpage...they sell it with the full 3 inch susp lift package..

Does Calmini sells the panhard rod bracket alone?

Felicitaciones

My pathfinder is a 93 and I haved changed the center link and tie rods and I have a rancho 5000 steering damper. Why when you have the 4wheel drive engaged and you are driving in a bad terrain, if you look the car from the front coming to you the front tires are bouncing from left to right when you are in straigh line and some times the look like they are pointing in. Does the aftermarket centerlink (lpperformance) as example fix this problem? What else I have to change?

Welcome back Mr Jim, from Panama.

:bow: :cool2:

Welcome!!

Thanks for the information, lets see if I can get a complete unit, engine, transmission, 3.5 or 3.3. Sometimes I feel like buying a V6 and taking everything off of mine and putting it on the V6.

Can I change the 3.5 V6 engine from a pathfinder to a 1993 WD21? Can the manual transmission of my car, is compatible with the 3.5 V6? My WD21 has a 4 cylinder right now with a manual transmission.

Welcome to NPORA

welcome to NPORA!!!

Here's the link! http://www.nissansportmag.com/newsnotes/20...ssantrucks.html

My old ones where a mess and when I did the body lift and the suspension I order everything through 4x4parts.com, they have it already cut, already to put on and all the clips.

The rear end is a C200 with 4.88 gears. Thanks for the information about the lights.

try 4x4parts.com

Yes it cost me $175 including materials and rhino lining and installation.

No I havent. When I receive it I will use it. I couldnt wait, mine was a mess. Besides the cost of a new centerlink is $75. What you can tell me about the lights?

Today I finished installing the centerlink and tie rods, washing the car and doing some small fixes. Now I have to go and test the car! This pictures are the rear bumper finished and intalled. Now I have to buy a good set of offroad lights! What brand do you people recommend me? KC lights IPF BOSCH HELLA PIAA Wich one is the best for the money? I want flow lights, no spotlights.

Welcome pics are also welcome!

Congratulations on the truck of the year!! What is the best month for you that I can send my truck that way you can do the SAS?