giancarlo93

I just join NPORA gang again!

Welcome!

Welcome

:beer:

Welcome! Is that the silver R50 with chrome rims?

Thanks to everyone! And yes it was a close race, you got me worried.

Welcome to NPORA!

Welcome to NPORA!

I dont remember what brand are they. I bought them 14 years ago.

33x12.50 15x7 wheel -12.8 mm offset

My 33x12.50 runs with no problems. I think the wheel offset makes a lot of difference. Here in Panama theres another lifted pathfinder with 33's but his wheel offset push the wheels out to much and he had to trim a lot to get rid of rubbing. I want to know if the front suspension will hold? What mods I have to do to the suspension?

Have someone put 35's with IFS? What have you changed? Any problems?

Nice pickup! What size of wheels and tires? and what is the factory gear?

Welcome!

That engine looks to be 12 cylinder, from a lamborghini countach. The carburators are webber or solex. Definately is an Italian engine. My 2 cents.. Who ever did it, had a lot of free time and a lot of money to put an engine like that on that POS.

:fireworx: :fireworx: congrats

Welcome to Npora! Nice cars!

Thanks

My pathfinder (1993, 4 cylinder Z24, 4x4) has a R180 in the front. I want to know if I can swap a C200 from a V6? The reason I want to do it is because ARB doesnt make a locker for that differential and the lower in gears I can go is 4.88, that I already have.

Congratulations :fireworx:

Vengeful you are more than welcome. Just let me know.

I have decide to buy the gears for my truck, WD21 1993, 4 cylinders. Besides 4x4parts.com and calmini is any other place I can get the gears cheaper? Calmini sells this one 3.92:1 4x4 parts sells this one 3.7:1 Calmini says that they have it for the 4 cylinders and V6. Both engines have the TX-10 transfer case, whats the difference? Any help?

Post Pictures when you are done!

Looking good Max! What gears do you have?

In the following pictures you can see were I cut the bull bar and add an extra piece of steal and weld it. And then paint it with rino lining. Its no a profesional job but holds the bull bar with no problems.