KILLVOX

What the he11 am i doing wronge with this QUOTE CRAP!!! Thought i did it correctly one time :confused: pssd

QUOTE]wow thats looks wicked! How'd you do it? Took a three in. grindeing wheel and cut all the thinner pieces out, sanded down the burrs, then i primed and painted it. super easy.

Has any body seen these there are a bunch of them on ebay.

We have talked about this a few times and it easy to paint the rims. and personally I think ilooks sweeeeeet. DO it... Just do it. :cool2:

Hey Pezzy, Sweet truck. I always liked them. Is that tire rack from a pathy?

Put a piece of diamond plate floor mat in the slot for the parking brake handle to keep out some of the heat from the tranny.

Added some white face / green glow gauges.

The pieces for the 3 hood slots are held in by pieces of wire. Thanks for the props. I thought it came out pretty sweet. -bounce-

Im planning on getting a new one. But i heard that the plate style is better than the fin style. I think it was 88 that said it.

Well, I cut out the thinner pieces in the grill and this is the result.

Modified, and painted the front grill this week end.

Thanks V6. I just spent the first hour of my work day watching movies on that web site. Good stuff. :cool2:

Does it hold up against turds

Good idea getting rid of the heap and not the Pathy :cool2:

The lights lasted about three days there before i took them off and put them on the roof. I agree with you, they were way to low. Im putting a 3in. susp. lift on it, hopefully it will help with the angle. as for the mesh, i now have it behind the grill.Doing some fab work to the grill to open it up. cutting out some of the thinner cross pieces.

It was a screemer. :bow:

HUH? :confused: -alcohol-

Yo Grim, nice job man! I gotta learn how to weld -bounce-

The mesh is actually Gutter covers from Home Depot. I just cut pieces out and popped them in. Do you think the bars on the web site are ugly or the ones on my truck?

Very, very ugly. :oops: When i orderd my bull bar, I believe he called it an "A bar". Mabey you can call them and ask for that. Make sure you tell them if you have a body lift or not. Good luck. I will see if i have some old paperwork on it, mabey a part #.

Here ya go... Sterling Equipment & Manufacturing Co. of Central Florida, Inc. 803 Line Street Umatilla, Florida 32784 Phone:(352)669-3255 Fax:(352)669-7711 Email Address: sales@sterling-equipment.com Web Page: www.sterling-equipment.com

Well, my nudge bar / turd pusher is made by Sterling. And i bought it from a local 4x4 shop here in jersey. Mabey Sterling has a web site.

The brand i bought are Sterling 3in tube. 275.00

Old school RULES!!!!! So does O'doyll

I have always wanted one ever since they came out because of the looks. So when it was time for a new ride i looked for one and i found it. One of the happiest days of my life -bounce- :cool2: