KILLVOX

New sticker for the back window

No, no problems so far. Runns strong and sounds smooth. The only dont i can think of is dont be under the truck when your idiot cousin is holding the main pully assembly ( three pullies bolted together ). He may drop it like my cousin did. Now i have a really cool gash in my face. :eek: pssd -argue- :furious: :cool2:

I know we talked about this before but i cant find it. Can any other parts get worn out faster or damaged if you take of your front sway bars and you do just normal every day driving? Thanks

Just installed new thermostat, water pump and timing belt. -bounce- :cool2:

Yeh, i need the clearplastic lense cover to the instrument cluster. Name your price

If it was the o2 sensor wouldnt it give me an error code?How do i check to see if the o2 is the reason.

He all, When i bought my pathy it had 75,000 miles on it so i am almost positive the timing belt was not replaced. It now has 163,000 miles and i am changing it this week end. My question is deo you think the old timing belt could be the reason for this ongoing problem i have with the idle fluctuating. Also when the idle is at its lowest where it almost cuts out, there is some black smoke coming out and the plugs are pretty black. Could that be from an old timing belt. Sorry, Lost and stupid :confused:

How long can i go before i cant drive it. And i looked for a thread but icant find one on how to put in a new on. Is there one

i just noticed that i have antifreeze leaking from what i can tell is the center pully area on the front of the engine Does any one have any insight on this? thanks

Whats an ass thanks. sounds kinky :o

first thing i did was do a check on the ECU. and it gave me an error code 55 ( no malfunction).Thanks again for the tips. Im going to try all of them this week end. the problem is intermitant. its actually running good now. A little bit of black smoke did come from the exhuast when i first started it after it was sitting for about 9 hours. What is "LIMP" mode.

Thanks for all the input. You guys rock. :bow:

When the pathy is a t normal idle rpm's the tac fluctuates up and then down and stalls. If i keep my foot on the gas pedal it stays running. but as soon as i let off, it stalls. Some one told me to replace the throttle body sencer so i did. wasnt the problem. I have a good flow of gas going to the engin so i dont think its the fuel pump. Please help if you can. thanks :sniff:

OOOOPS! This is the tire.

I have GT Radial Savero 31x10.5's on my truck now and i love them. These are the ones im getting next. Very cheep price :cool2:

WHA WHA WHAT!!!!! Never I TELL YOU! NEEEVVVVEEERRRRRRRRRRRRRRRRRRRR!!!

About a year after i bought my 95 ihad the front seats out and under the drivers seat i found the keyless entry remote under the rug covered in white dog hair. -bounce-

They are held in by some thin wire that cant even be seen. Just loop it around the mesh and then thread it through the slots in the vents and bend it over. It holds really well. Also the mesh has a galvinized look to it so i sprayed it with some metallic crome paint. looks like the real deal. Good luck.

The mesh on the front bumper is painted black and covers the signal lights. good protection for you turd jumpers out there.

You can buy the mesh at Home depot. They sell it as Gutter covers, to keep leaves out. As far as holding it in there i used pieces of a hanger i cut to size andput them between the tranny cooler and the mesh pushing the mesh towards the front grill. I will take pics if any body wants to see what the hanger pieces look like. If you guys look closely at the bumper i also put the mesh around the fogs and signal lights. :cool2:

Here is a shot of my baby at night. Does any one else have pics of there pathy's with their light setups. love to see um. -bounce-

Here is another pic of the grill. Sorry about the lighting. Didnt want to lose my parking space

Dude that looks sweet. Do your stock driving lights work? You should take a pic with those on as well. I have been meaning to take a pic of my lighting set up. Now i have to

Thanks for the props -bounce- Yeh, the gauges did come off Ebay. And there is a switch that you can change the color to green or blue. Really easy to install. I just saw a couple sets on there yesterday. I will take a shot of the grill from farther back on my coffee break. BTW, I also lined the two coin trays on the center console with the diamond plateing. Looks sweet. Thanks guys.

I could paint them black just like every thing else on my truck, but thats good to know about the size. Thanks guys