- Sign In Changes: You now need to sign in using the email address associated with your account, combined with your current password. Using your display name and password is no longer supported.
- If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.
Leaderboard
Popular Content
Showing content with the highest reputation on 05/22/2024 in Posts
-
Searching on youtube for nissan r50 strut installation should give you a few pretty detailed diy videos. I swapped my aging/failing oem shocks/struts/springs for an OME/KYB setup (as well as kyb mounts and bearings. It was fairly straightforward. Its much easier if you can get a second person to help you remove the front struts. I used this spring compressor and it was very effective and seemed solid/safe: https://www.amazon.com/gp/product/B01DP2CDJU/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=11 point
-
The rear are just a quick swap and drop in replacement, the front are not the same. You'll have to get a spring compressor for the front coils to safely remove/install the coils from the shocks. I run KYB and the 5100 setup and it's what I expected for the research I did. Pretty stiff in the front which I prefer, and the rear with the 9449 coils is still pretty soft but holds a lot of weight when camping. Not a super hard job, but is a bit scarier to do with the higher spring rate AC coils. (the stress could've turned my hair grey at 20)1 point
-
Everyone usually use KYB shocks and struts to replace their worn-out components and these are going for cheap on RockAuto here's a discount code 26541693695688324. You can also use the Bilstein 5100 Series https://amzn.to/3V3UdMN for the rear since you have a lift, but it will require some modifications to run these shocks on the rear of your R50. Chris.1 point