Leaderboard

@R50JR is that an ARB bumper on the Infiniti? It looks really slick.

Every pan I do I just use black permatex RTV and never have any leaks. The wd21 pans come with 2 small gaskets at each end the rest is liquid sealant. I would assume the r50 is the same as my VW with the 2 piece oil pan. I used RTV on that as well with no issues.

I would definitely use a quality gasket and rtv. Is this upper or lower pan? I would do the same for both. No way I would just use rtv.

I have used both in the past. Black RTV by itself and a gasket with permatex gasket sealer. Both worked well, no leaks.

Rtv

Wheels painted, and tires mounted. I’m pretty happy with the results! Went with General Grabber ATX’s in 31x10.5. They are quieter than I expected for as aggressive as they are but they do rub quite a bit more than I was expecting in reverse so I need to figure that out... Next is figuring out what to do with the spare. Wilco seems to think a Hitchgate high clearance will work with the Curt Hitch, I just need to decide if I want to spend $700 on that, or mount it in a roof basket...

That list looks right so far. Ditto on the OEM strut mount. Bilstein good choice. My list: OEM Replacement Parts Strut Bearing [54325-5V000] $48.54=$24.27x2 Spring Seat [54034-0W000] $45.42=$22.71x2 Bellows & Bump Stop [54050-0W002] $38.86=$19.43x2 If you’re not a manual, you should get the power valves done as well. http://www.nissanpathfinders.net/forum/topic/17104-threadlocker-on-power-valve-screws-pics/page-1