MLML

LR 9448 springs (one coil removed) with Bilstein 5100's in the rear, KYB struts and OME springs in the front. About 2.5" of lift.

Will post some photos once done. I’m probably going to weld some more support pieces on these to beef them up a bit. Sent from my iPhone using Tapatalk

Going on this week! Any advice?

I’m going to do manual hubs at the same time. Thanks!! Sent from my iPhone using Tapatalk

Just a double check guys. I'm planning to order this Lokka for my 2002 QX4. Any issues I need to be aware of? Part number NIS-FO-293 on the Lokka site.

Yep! I put LR springs and Bilsteins on the rear, giving about 2.5" of lift. I have a 2" spacer on the front now, but next week KYB/OME springs with 1" spacer. I have skid plates on now and rock sliders are coming next week, along with manual hubs. Lots to do! I actually bought that QX4 brand new in 2002 and never drove it very much, so it has pretty low miles on it. The benefit of a California car, especially where I live and it's almost always 70F, is no rust, leaks etc. It's technically my 16 year old son's truck now, but I'm having fun working on it.

I have a 2002 QX4 with LSD axle. I may start with a Lokka in the front with manual hubs, then do the rear later. Any issues you see with the QX4 variant?

Thanks! Probably easier to just swap the axle.

Anyone put one in their Pathy? Looking at maybe doing this one in my 2002 QX4. https://www.4x4parts.com/i-18915694-complete-detroit-locker-assembly.html

No problem! Thanks for trying!

Is there a group buy going on? If not, I will order one off eBay.

The QX4 boxed in by Jeeps!

It took about 2 weeks from the time I ordered to arrival at my door. Great meeting you today! Thinking about the SFD and 6 inch lift......