automatic shift nob

[mattd123]

well you guys must be sick of my questions by now but this forum is like christmas for me. my shift nob for the tranny not 4 wheel is sticking well the button is the linkage is clean and nothings bent how hard is it to change it assuming a ican find one that will fit and beable to replace it any one ever done this before thanks guys i love this forum

[88pathoffroad]

Takes a Philips screwdriver. Take it off yourself, clean it up and see if it doesn't work better.

[mattd123]

ive tried taking off the 2 screws on it but it wont slide off and i dont like forceing things unless thats the only way to get it off because it has the over drive button on it and i dont want to make it worse than it already is

[Precise1]

Glad you like the place Matt.

 

There is a link somewhere for the FSM, I'll try to find it... A basic Chilton or Hayes manual can be invaluable for these things to figure whats hanging it up, etc...

That said, I have a manual so I have no idea...

 

B

[88pathoffroad]

It will slide off, trust me. Careful you don't lose the spring inside, it's greasy.