Gabriel Posted June 30, 2006 Share Posted June 30, 2006 so should I just replace it ? -thnkboutit- Link to comment Share on other sites More sharing options...
88pathoffroad Posted June 30, 2006 Share Posted June 30, 2006 Or take a closer look at your plug wire for that plug. It may be arcing to the head from a crack in the insulation. Spark plugs by themselves do not make noises. Link to comment Share on other sites More sharing options...
mws Posted June 30, 2006 Share Posted June 30, 2006 Click at spark plug? As '88 said, remove the plug wire, CAREFULLY check it for holes or cracks (even a tiny pin hole can allow arcing). And then check if the plug itself is tight. If the boot is OK, I bet you'll find the plug is loose! Link to comment Share on other sites More sharing options...
Precise1 Posted July 1, 2006 Share Posted July 1, 2006 If the boot is OK, I bet you'll find the plug is loose! Bingo. A few months ago I walked past a neighbors truck when he was finishing an oil change. When he started it, I listened then asked him to shut it off. Then I told him his #3 plug was loose, but better check them all. He was totally baffled by my ablility to figure that out in seconds. All I did was listen and wiggle a few things... Replace all of them if they need it... B Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now