Chupacabra Posted January 23, 2006 Share Posted January 23, 2006 Does anyone know if headers for a 300 ZX will fit on and into the engine compartment of a 95 pathfinder? There are a lot of options for the 300 headers as opposed to the Pathy. Link to comment Share on other sites More sharing options...
jj big shoe Posted January 24, 2006 Share Posted January 24, 2006 I haven't checked, but I'd doubt it or else it would've been mentioned on at least one of the boards I look at. Try posting your question on nissan4wheelers.com. Those guys do a LOT of fabrication and mods. If someone's done it, they'll probably have heared about it. Link to comment Share on other sites More sharing options...
DSM_guy Posted January 24, 2006 Share Posted January 24, 2006 IIRC they are not the right shape...as in leading back to the collection pipes Link to comment Share on other sites More sharing options...
Spooled Posted January 30, 2006 Share Posted January 30, 2006 If you're talking about the 80's Z31 300ZX, no, they will not fit. The rear most primaries on both sides will hit the firewall. You would have to modify them. There are already at least two options for the Pathfinder though - PaceSetters or Thorley's. Link to comment Share on other sites More sharing options...
GrimGreg Posted January 30, 2006 Share Posted January 30, 2006 Yeah, IIRC the crossover pipe goes over the tranny also, instead of under like on our trucks. Might work with a BL and a good hammer Link to comment Share on other sites More sharing options...
Spooled Posted January 31, 2006 Share Posted January 31, 2006 Yeah, IIRC the crossover pipe goes over the tranny also, instead of under like on our trucks. Might work with a BL and a good hammer Nah - that's only the turbo model that has the crossover pipe over the transmission. Link to comment Share on other sites More sharing options...
packie88 Posted January 31, 2006 Share Posted January 31, 2006 doestn the 300zx have the same motor as the pathy??? Link to comment Share on other sites More sharing options...
88pathoffroad Posted January 31, 2006 Share Posted January 31, 2006 Well, the NA ones from 90-95 have the same VG30E but with different FI setup and ECU. The 86-89's had VG30E's while 86-89 Pathys have VG30i's. Same block up till they went to a DOHC design for the Z32 line. I don't know that much about 300ZX's tho. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now