Running wires

[parthy]

high guys having trouble finding any spots with rubber gromets to run wires from the cab to the engine bay do you have to drill a hole and if so what would be the best spot :secret:

[Pezzy]

hmm... I found a spot on mine... was on the driver's side maybe 6" down from the top - there was a flat circle of metal screwed to the firewall... when I unscrewed it there was a hole to the inside - came out under the dash - high up in the foot well, although not very big - but I was able to run a few wires thru... it's not watertight now - not without some silicone...

[parthy]

thanks pezzy found that spot but they have put a computer box or somthing over the top of it didn't want to run anything to close to it (uhf or cb ) in case it @!*%'s it's self

[deej]

Here ya go

http://www.nissanpathfinders.net/forum/index.php?showtopic=2513&hl=

[parthy]

Thanks man I will check it out Just have to remember the steering wheel is on the other side -thnkboutit-

[Trainman]

Here ya go

http://www.nissanpathfinders.net/forum/index.php?showtopic=2513&hl=

In addition to his, if yours is an automatic, you can run it thorough the hole used for the clutch. It has a plated held on by 2 bolts that you can undo and get wires through. Be careful pulling them though as they will rub on raw metal.

 

high up in the foot well, although not very big - but I was able to run a few wires thru... it's not watertight now

Not sure I would want to go that deep in water with out some other items, like a submarine :allclean:

[FUELER]

like he said, main wiring rubber grommet.

 

 

I also drilled a hole next to the metal grommet for my 6 gauge power cable.