Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

Crank No start rpm won’t lift


ThatOneNissanGuy
 Share

Recommended Posts

I was driving back from work then had to come to a stop on a red light and the truck started idling at 2k rpm i moved the mtps as low as possible and it was then at 1.2k at home i resetted the tps to factory position and just adjusted the idle screw now it idlesll at 800 rpm stopped but then when you're in neutral or press the clutch while moving anywhere past 5mph it revvs to 1.5k and when you revv it and lift of the throttle in neutral the truck drops to 425~ rpm before jumping back to 800, today I tried going to work and it just cranked and didn’t start the dizzy cap was shot so I bought a new one, it didn’t work so

i bought an ignition module and coil but turns out it might be the ckp but where is the ckp

VG33E FS5R30A 

Edited by ThatOneNissanGuy
New issue
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...