slevin Posted May 23, 2005 Share Posted May 23, 2005 Is it possible to swith my front seats? as in put the driver's seat in the passenger seat and the passenger seat as the driver seat? I have a 92 xe. Doesn't look possible to me because the track heights are different. Link to comment Share on other sites More sharing options...
GrimGreg Posted May 23, 2005 Share Posted May 23, 2005 Like you said, the track heights are different, the seat its self has an offset for the tracks. Best bet is to search the junk yards for some replacements if they are too bad, or hunt down some new covers. Link to comment Share on other sites More sharing options...
88pathoffroad Posted May 23, 2005 Share Posted May 23, 2005 Exactly. They're different. Link to comment Share on other sites More sharing options...
jj big shoe Posted May 23, 2005 Share Posted May 23, 2005 Sure you can, but you'd be facing the rear. With a little time and ingenuity you could make just about any seat fit in there. A couple people here (GrimGreg for one, I think) have swapped in Maxima seats and I changed mine out for '92 Integra buckets. Link to comment Share on other sites More sharing options...
GrimGreg Posted May 24, 2005 Share Posted May 24, 2005 (GrimGreg for one, I think) have swapped in Maxima seats Yes I did But it's not a "simple" swap. Need to make new mount points for the Maxima rails. Link to comment Share on other sites More sharing options...
jj big shoe Posted May 24, 2005 Share Posted May 24, 2005 But it's not a "simple" swap. You said it, man. It took me two days to get the Integra seats in. I used the stock Pathy rails and built brackets between the outer rail and seat bottom to level it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now