MisfitGarage Posted October 4, 2022 Share Posted October 4, 2022 So I own a fab shop and had a customer bring in a 1996 Pathfinder that was having a loud clunk in the front suspension. That’s when I learned that the tension rod/strut rod bushing cup rusts off or breaks off these vehicles all the time. I found what seems like some people did and weld a bearing race on where the oem piece was. But the bearing race really wasn’t very tight. Seemed like there should be something better. So here’s what I came up with. The tapered cup extends past the bushing to give it extra material for when the control arm pivots . The bushing touches the cup all the way around and when tightened it easily self centers itself as well. This turned out even better than I had hoped for. Don’t judge from the picture with the bushings I’m still waiting for the new ones to come in but even with these the front suspension tightened up drastically. What do you guys think? I’m contemplating if there’s a market for manufacturing some of these? They fit better than the race. They would be much cheaper than the races. I could only upload 1 photo. Link to comment Share on other sites More sharing options...
Slartibartfast Posted October 6, 2022 Share Posted October 6, 2022 I used the races on mine. Did seem a little loose, but the bushing sorta filled it once it squished down. Yours looks like a better fit. Is it a custom piece or a repurposed off-the-shelf? Link to comment Share on other sites More sharing options...
Rob22 Posted March 31, 2023 Share Posted March 31, 2023 On 10/6/2022 at 2:18 AM, Slartibartfast said: I used the races on mine. Did seem a little loose, but the bushing sorta filled it once it squished down. Yours looks like a better fit. Is it a custom piece or a repurposed off-the-shelf? Do you know the size or the part number bearing race you used? And you had to weld them in right? Link to comment Share on other sites More sharing options...
Slartibartfast Posted March 31, 2023 Share Posted March 31, 2023 I think they were Timken L68111. They weren't perfect, but they were close enough. And, yes, weld-on. Weld it good and hot, there's a lot of carbon in that bearing steel. Link to comment Share on other sites More sharing options...
adamzan Posted April 4, 2023 Share Posted April 4, 2023 On 3/31/2023 at 12:52 AM, Slartibartfast said: I think they were Timken L68111. They weren't perfect, but they were close enough. And, yes, weld-on. Weld it good and hot, there's a lot of carbon in that bearing steel. Learned that lesson, mine weren't welded hot enough apparently. Noticed one of them was broke off the other day... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now