crab Posted February 2, 2017 Share Posted February 2, 2017 All new in Jan 2016 when I bought it- O2 Sensor, cleaned EGR valve, 6 fuel injectors, spark plugs, wires, cap, rotor and coil, cleaned MAF sensor, PCV Valve, idle air control valve, Timing Belt , water pump, seals, thermostat, radiator. It ran fine till the other day when the motor just shut off. It'll turn over fine, but no spark. Obviously I'm no mechanic. any ideas what it might be? Thanks Link to comment Share on other sites More sharing options...
adamzan Posted February 3, 2017 Share Posted February 3, 2017 Take off the distributor cap, see if rotors turns. If not, suspect timing belt. If it does, check ignition coil and the distributor itself. 1 Link to comment Share on other sites More sharing options...
crab Posted February 3, 2017 Author Share Posted February 3, 2017 Thanks, I'll try those things if the rain stops this weekend. Would the timing belt go with no noise or anything? Also, does this have a crank angle sensor? Link to comment Share on other sites More sharing options...
Slartibartfast Posted February 4, 2017 Share Posted February 4, 2017 Crank angle sensor's in the dizzy. I doubt you'd hear the T-belt going out over the sound of the engine running. But hopefully it's not that! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now