mickmutante Posted June 29, 2016 Share Posted June 29, 2016 (edited) I just changed my inner cv boots for Nissan's, they where really really expensive... Almost 70 dolars (COP$200.000), and the outer cv boots for OEM or i don't know the brand for 7 dolars (COP$7.000).. really cheap.... But the Nissan's plastic seems much better that the cheap ones... I have read good comments about Rockford cv boots.... I found these silicone and neoprene boots... http://www.autozone.com/drivetrain/cv-boot-kit# Or these HippoRed, from Italy... http://www.hippored.com/?portfolio=cuffia-facile-easy-boot-cv&lang=en Which could be a good quality cv boot and with a reasonable price? Edited June 29, 2016 by mickmutante Link to comment Share on other sites More sharing options...
ferrariowner123 Posted June 30, 2016 Share Posted June 30, 2016 Just go Rockford. There have been zero issues with those who have installed them. They cost a little more but are built to a higher standard. -Kyle Link to comment Share on other sites More sharing options...
mickmutante Posted July 2, 2016 Author Share Posted July 2, 2016 Just go Rockford. There have been zero issues with those who have installed them. They cost a little more but are built to a higher standard. -Kyle How much do they last? In months or miles? Thanks. Link to comment Share on other sites More sharing options...
Rebelord Posted July 4, 2016 Share Posted July 4, 2016 I have torn my Rockford CV boots. They are not bullet proof. 1 Link to comment Share on other sites More sharing options...
patqx4 Posted July 4, 2016 Share Posted July 4, 2016 I have torn my Rockford CV boots. They are not bullet proof. +1 me too. Link to comment Share on other sites More sharing options...
mickmutante Posted July 6, 2016 Author Share Posted July 6, 2016 I have torn my Rockford CV boots. They are not bullet proof. +1 me too. Which cv boots are you using? Link to comment Share on other sites More sharing options...
patqx4 Posted July 7, 2016 Share Posted July 7, 2016 I currently have 1 Rockford and 1 $10 generic. Both inners, never replaced an outer. Link to comment Share on other sites More sharing options...
ferrariowner123 Posted July 11, 2016 Share Posted July 11, 2016 I have torn my Rockford CV boots. They are not bullet proof. Really? Dang talk about an egg on face moment. My apologies for the misinformation -Kyle Link to comment Share on other sites More sharing options...
EBeau Posted July 12, 2016 Share Posted July 12, 2016 added a 2" spacer lift. OE axels with 160k miles on 2002 Only been running in 2wd since added in March a little more stress on the boots,but would you expect to pop both outers ? passenger side seperated inner first an then I noticed outer clamp gave out. no I notice Driver side is allowing grease to dump out, even though clamp entact still, but cant imagine for long. I will install new axel assemblies since they are pretty cheap and 160k is a good run. Anyone have similar experience with spacer lift and then boot issues ? thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now