aussie4wheeler Posted October 20, 2015 Share Posted October 20, 2015 Hey guys, as some of you know I blew the motor in my 02 pathy last week when 2 of the power valve screws came loose and were sucked into a cylinder. I have order a full DNJ Engine rebuild kit with new pistons, rings, gaskets, timing kit and freeze plugs. I also went ahead and ordered a new water pump, new drive belts, new oil pan (mine is rusted and thin) 2 lots of oil, 2 filters, new iridium NGK plugs and thermostat. I figured while the motor is out I might as well replace hard to get to parts that are relatively cheap. My question is: does anyone think there is anything I haven't mentioned that I should replace or overhaul while the motor is out? Cheers, Josh Sent from my XT1254 using Tapatalk Link to comment Share on other sites More sharing options...
adamzan Posted October 20, 2015 Share Posted October 20, 2015 What about the main and rod bearings in the bottom end? I assume the kit came wit those? Link to comment Share on other sites More sharing options...
aussie4wheeler Posted October 20, 2015 Author Share Posted October 20, 2015 Yes main and rod bearings, and thrust washers are also included Sent from my XT1254 using Tapatalk Link to comment Share on other sites More sharing options...
aussie4wheeler Posted October 20, 2015 Author Share Posted October 20, 2015 http://www.rockauto.com/catalog/moreinfo.php?pk=1813658&cc=1431960&jnid=495&jpid=5 Sent from my XT1254 using Tapatalk Link to comment Share on other sites More sharing options...
jyeager Posted October 20, 2015 Share Posted October 20, 2015 How about the knock sensor? It's a pain to get to it if/when it goes bad. Might be worth a preventative replacement? 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now