What size bolts for rear trailing arms?(upper and lower)

[NovaPath]

Subject matter states it all. Nissan dealer wants $14.00 per bolt-crazy.

 

Thanks,

[hawairish]

If I was home, I could get you the exact measurements. I'm certain they're 14mm x 1.5mm, though. You should be able to put a ruler on yours while still installed to get the final length.

 

Per my post below, you can see that one set of bolts gets cut/sheared off, but the length to the thread end is the same.

http://www.nissanpathfinders.net/forum/topic/39956-my-first-r50/?p=751089

 

Paid $1.62 for the cheaper bolts from Courtesy Parts (I use "nis10" to save on shipping). Rob Lacy here can surely get them as cheap. The "more expensive" (short) bolts were $2.54. Far cry from your rip-off dealer. Also, keep in mind the OE nuts are PTLN's flange nuts. I'd stick with those.

 

 

[NovaPath]

Awesome thanks, exactly what I was looking for. I tried to purchase from courtesy parts, and still might, but the process has not been easy....

[jyeager]

In case anybody needs these bolts, I ordered an entire set of genuine Nissan bolts and didn't need them.

I think I can still find them somewhere...