rear track bar

[PINION]

Any aftermarket track bars or brackets to put rear axle back center after lift?

[Rebelord]

With just AC springs you should be fine. The only ones that make a bracket that I know of is Krypton Fab. And its for a 4-6" lift. Aka when you do a subframe lift.

 

Sent from my Moto X

[PINION]

not fine, off by 3/4", I can live with it for a bit

Edited October 18, 2014 by PINION

[Rebelord]

3/4"? Remember after about 6 month those springs will settle about 1/2" which you'll be fine.

 

Sent from my Moto X

[01Pathmaker]

The ac springs definitely do some settling, when I first installed my medium duty ac's in my 01, I had just under 2" of lift (oem springs were still in great shape, only had about 70k miles), after about 10k they were down to about 3/4" lift from previous stock height. Give them some time to come down. As for centering the wheels in the wheel well (front to back), Rugged Rocks makes some very nice adjustable upper and lower links.

[PINION]

I figured as much, I have more then 2" of lift today, LOL. Makes them 30" tires look tiny

 

Edited October 19, 2014 by PINION

[PINION]

wondering if JKS makes a rear track bar that will fit

[jyeager]

Remember that as your suspension compresses, the axle will be swinging up and back. After you recenter it at ride height, you might hit the back of your wheel well or fender lip when you compress the suspension.

 

Nonetheless, to recenter, you could make your own longer control arms. Pretty easy and reasonable cost too.