NIssanBoston Posted August 28, 2014 Author Share Posted August 28, 2014 Haven't got a chance to run them on snow, snow seasons coming up fairly soon so i get to try them out then. I also plan on going mudding once i get my lift. Looks good man, you'll really like those Grabbers in the snow. Put a set (255/70/16) on my '01 just before a good dump last winter, I was cruising through 14"+ like it was on rails! So far, these are some of the best "do it all" tires I've had, great on dry/wet pavement, snow/ice, beach, hard-pack dirt and light mud. Haven't run them in deep gooey mud yet either. Link to comment Share on other sites More sharing options...
NIssanBoston Posted October 5, 2014 Author Share Posted October 5, 2014 Haven't been on in a while been busy with work and my family, in due time replaced my o2 sensor and yesterday i just replaced my radiator and fan shroud. wasn't to bad of a job at all. Looks much much better now. Reason i replaced my shroud was because i accidently broke it climbing on the truck to remove one of the clips holding the o2 sensor my arms were to short and my knee slipped and broke the shroud. lol Link to comment Share on other sites More sharing options...
NIssanBoston Posted October 5, 2014 Author Share Posted October 5, 2014 Old and crummy radiator You could definitly tell i needed a new radiator, had a leak from it aswell. I love the way new parts look all replaced and installed. Still have my kyb shocks , those i plan on installing next week Link to comment Share on other sites More sharing options...
01Pathmaker Posted October 6, 2014 Share Posted October 6, 2014 Nice work! Link to comment Share on other sites More sharing options...
NIssanBoston Posted October 7, 2014 Author Share Posted October 7, 2014 Thank you for that pathmaker (:, hopefully ill have enough for my lift by december... Nice work! Link to comment Share on other sites More sharing options...
green180 Posted December 6, 2014 Share Posted December 6, 2014 You weren't kidding when you said ours look the same, I want to see some side shots of your truck, have you installed a lift yet Link to comment Share on other sites More sharing options...
NIssanBoston Posted December 14, 2014 Author Share Posted December 14, 2014 Yes i just installed a lift 2 weeks ago. Pics coming up. You weren't kidding when you said ours look the same, I want to see some side shots of your truck, have you installed a lift yet Link to comment Share on other sites More sharing options...
NIssanBoston Posted December 14, 2014 Author Share Posted December 14, 2014 Well this hasn't been updated in a while..., Lots of stuff happened, got my AC Coils in the mail and had them installed. 5 days later the strut topped out on me and completely disassembled. Had it towed to my mechanic , the new strut mount was also busted aswell so i had to replace both of those. Not a fun experience at all, once everything was all fixed i went off-roading with a fellow NPORA member here who goes by the name of 93_Ditchfindah. That was an adrenaline rush for me.. I was amazed my pathy could handle that much abuse . Also removed my sway bar and sway bar links for extra flex. Testing out a bit of flex Link to comment Share on other sites More sharing options...
NIssanBoston Posted December 14, 2014 Author Share Posted December 14, 2014 Quick stance of AC Coils installed. Link to comment Share on other sites More sharing options...
Craig1902 Posted December 15, 2014 Share Posted December 15, 2014 nice pathy, did removing the swaybar/links make much difference to on road handling? considering doing this myself now that the bushes need replacing Link to comment Share on other sites More sharing options...
NIssanBoston Posted December 16, 2014 Author Share Posted December 16, 2014 Not to much of a difference, you just can't make sharp turns around corners which you shouldnt do since your in a SUV, to explain it a little bit going over slopes and slides you just feel your truck shift side to side , you get used to it after a while i like it personally. Getting the actual sway bar was a bitch to get out, get something you can cut it with i didn't have access to a power saw so i had to pry it out lol. You get so much more flex too nice pathy, did removing the swaybar/links make much difference to on road handling? considering doing this myself now that the bushes need replacing Link to comment Share on other sites More sharing options...
Craig1902 Posted December 16, 2014 Share Posted December 16, 2014 I've got access to a full race team workshop (we have 4 drag cars) so getting it out wont be a problem Link to comment Share on other sites More sharing options...
NIssanBoston Posted December 16, 2014 Author Share Posted December 16, 2014 I say go for it , i like the feeling of not having a sway bar lol. I've got access to a full race team workshop (we have 4 drag cars) so getting it out wont be a problem Link to comment Share on other sites More sharing options...
Craig1902 Posted December 16, 2014 Share Posted December 16, 2014 I will be, just gotta find time when the hoist is free, probably be a few weeks as right now we're getting the race cars ready for a meet and thats a bit hectic when there's 4 of them lol Link to comment Share on other sites More sharing options...
NIssanBoston Posted December 16, 2014 Author Share Posted December 16, 2014 Never rode in on, always watched the races on TV though . Should only take you about 30 or 20 mins if you have access to a shop to remove the parts. I will be, just gotta find time when the hoist is free, probably be a few weeks as right now we're getting the race cars ready for a meet and thats a bit hectic when there's 4 of them lol Link to comment Share on other sites More sharing options...
Karmann Posted December 20, 2014 Share Posted December 20, 2014 Front swaybar removal for me was a 30 minute job in my driveway without a lift. I put it back on to replace some bushings, but took it completely off to inspect it etc. Link to comment Share on other sites More sharing options...
Leprechaun0321 Posted October 21, 2015 Share Posted October 21, 2015 Some pics with the jack on and more pics of the carrier for kyle So being R50's can you install a tire carrier on a 2003? I really prefer this look and also I would just feel better having my tire on the back rather than underneath. Link to comment Share on other sites More sharing options...
ferrariowner123 Posted October 21, 2015 Share Posted October 21, 2015 So being R50's can you install a tire carrier on a 2003? I really prefer this look and also I would just feel better having my tire on the back rather than underneath. Look hawairish , hes a member on here who has an in depth record of his process on the the swing away retrofit. -Kyle Link to comment Share on other sites More sharing options...
NIssanBoston Posted August 5, 2016 Author Share Posted August 5, 2016 Haven't updated this build thread in a while, lots of changes happened to my pathy. Some include -chopped my rear quarters -fit 33s on a 2inch lift -Bedlined half the truck -removed front and rear bumpers -longer shocks to accomadate lift -Custom exhaust -tail light guards Sent from my SM-G530T using Tapatalk Link to comment Share on other sites More sharing options...
NIssanBoston Posted August 5, 2016 Author Share Posted August 5, 2016 This is how she sits as of now Sent from my SM-G530T using Tapatalk 1 Link to comment Share on other sites More sharing options...
NIssanBoston Posted August 5, 2016 Author Share Posted August 5, 2016 Little flex from last weeks trip. The other vehicle i tagged along with. Sent from my SM-G530T using Tapatalk 2 Link to comment Share on other sites More sharing options...
NIssanBoston Posted August 9, 2016 Author Share Posted August 9, 2016 Last time i change this before i put my snorkel on, went with a spectre filter this time over my purolator Sent from my SM-G530T using Tapatalk Link to comment Share on other sites More sharing options...
NIssanBoston Posted August 16, 2016 Author Share Posted August 16, 2016 Got the front fenders cut this week, was way easier than the rear, took about 4 cut off wheels with 1 grinding disk , and a can of herculiner. Definitely will have more than enough space to clear 35s when i install my SFD. Sent from my SM-G530T using Tapatalk Link to comment Share on other sites More sharing options...
NIssanBoston Posted August 16, 2016 Author Share Posted August 16, 2016 Heres the video of the custom exhaust i had done on my pathy. https://vimeo.com/178979606 Sent from my SM-G530T using Tapatalk Link to comment Share on other sites More sharing options...
Pezzy Posted September 27, 2016 Share Posted September 27, 2016 Moved thread per NIssanBoston's request. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now