1995 SE 4wd green indicator wont come on

[Rafaguerra2000]

Can anyone give me a tip on how to check the 4wd indicator light. It was working properly but after a frame change its no longer working. The actual 4x4 seems to work fine.

 

Thanks

[Tungsten]

Let's start with the easy part... Is the bulb burned out?

Then you may have to check if everything is plugged in.

[silverton]

probably the bulb. it's just a dummy light, check the t-case shifter if you need to make sure.

[Slartibartfast]

You might also check the wiring around the transfer case and trans.

[GSeijo]

reminds me of mine...turns on whenever the hell it wants, but 4x4 works fine so I don't worry too much.

[Mr.510]

There are two switches on the passenger's side of the T-case, one of them turns on that light. Mine stopped working a while back and I figured it was the just the bulb. I was under the truck adjusting my RH T-bar that had sagged a little and noticed the wires are ripped out of both switches. A rock or chunk of wood probably got up between the T-case and the frame and re-arranged things at some point. Can't imagine how that could have happened as I only drive my Pathy to church on Sundays....