NextToAlaska Posted March 8, 2012 Share Posted March 8, 2012 So a few months after I sold my lil Jimmy to my ex gf, I bought it back (for way cheaper) and decided I wanted to turn it into a convertible mud bogger and beach cruiser. So I took the saw to it, cut the roof off, and all the other crap I did not need. Old picture, The interior is now fully bed lined and the roll bar is installed, The only problem I'am having now is trying figure out what to put in the holes where the support pillars were, I was thinking of making a Styrofoam cut out and then filling it with spray foam. but iam not exactly sure how strong that would be, Currently the whole back panels shake hard when I slam the door, and thats not good. Any suggestions would be awesome!! Also Its been sanded down and primer'd! Iam still trying to figure out what to paint it. I was thinking forest green or something like that. If anyone wants to suggest a color =D Link to comment Share on other sites More sharing options...
silverton Posted March 8, 2012 Share Posted March 8, 2012 Don't slam the door so hard! Fill it with some sound deadener foam or... seam sealer foam maybe? then weld it shut. Link to comment Share on other sites More sharing options...
Precise1 Posted March 8, 2012 Share Posted March 8, 2012 There is a thread here about a chop top Pathy that might give you some good ideas. It is in the Hard Core Fab section IIRC... B Link to comment Share on other sites More sharing options...
silverton Posted March 8, 2012 Share Posted March 8, 2012 Morningwould... or mourningwood? something like that. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now