rocky road ...

[captandy]

are the trim packers from rocky road a good choice to straighten out the rake after my 2" ac lift for the front struts?? i understand it will give me another Inch? got to have that level look...

[edicer2]

did u crank the torsion bars at all?

[nunya]

he no have torsion bars on that there caR50 and on that note, I am of no help. Someone should chime in soon enough though

[Phantom01Pathfinder]

i wouldnt add spacers until your lift settles...how are you CV's holding up?

 

i know it sounds like a PITA, but if you lift it too much your CV's will hate you! like mine...lol

[devonianwalk]

I have the NX4 1" spacers to level out my rake and personally love the look. However, I have installed manual hubs to disengage my CV's from spinning while I'm not wheeling. No problems so far ...

[captandy]

whats the best way to land the nx spacers,,,,,from canada/// any around in usa???i put the manual hubs on and saw much b etter mileage,,,, thanks guys

[devonianwalk]

I bought my Nx4's from a member here. Try googling "nx4 industries".

[DanAK]

I would go with cranking the torsion bars, you just have to get under there and look for them.

[Towncivilian]

I would go with cranking the torsion bars, you just have to get under there and look for them.

US R50s do not have torsion bars.

[Daddy Rim]

quote name='devonianwalk' timestamp='1320281526' post='595581']

I bought my Nx4's from a member here. Try googling "nx4 industries".

 

Or visit http://www.nx4industries.com[

Edited November 6, 2011 by Daddy Rim

[SilverPath]

US R50s do not have torsion bars.

 

I can't tell if it was Sarcasm lol, since he has an R50

[edicer2]

he no have torsion bars on that there caR50 and on that note, I am of no help. Someone should chime in soon enough though

 

ha oops didnt notice the year it was

[devonianwalk]

ha oops didnt notice the year it was

 

 

Lol! This is the R50 forum.