Can any one please go make a quick measurement

[MaritimeMan]

Today I finished up installing the calmini steering upgrade, and well, lets just say those are some beefy replacement parts. However, on the driver side, the tie rod adjuster hits the sway bar when the wheels are cranked full right.

 

The measurement I am looking for is from the ground to the bottom of the attachment point on the spindle, where the tie rod connects to. I measured mine, and Passenger side: 15" Driver side: 14 3/8"

 

I think my spindle might be jacked, as the control arm spindle, and tensioning rod, were both bent to heck, most likey due to a wheelin incident, thanks for the help and the measuring.

 

M.M.

[MaritimeMan]

Oh by the way, I'm runnin 31's for tires

[vengeful]

Don't have a WD21, sorry....

 

For anyone who's wondering, he's got a 1991 SE.

[DSM_guy]

heh, just so happens that i too have a 91 SE. its a little late now, but ill try and get your measurements tomorrow sometime.

[MaritimeMan]

Oh yeah lol, thanks for pointin that out. heh

[88pathoffroad]

A measurement from mine wouldn't help you any, I have 33" tires. It'd be off by as much difference in tire tread height is between mine and yours, and mine are about half worn out. Plus tire pressure, parking angle and/or steering wheel angle will affect the height of the same thing. Heh.

[sw]

MM please please please take some photos of the calmini steer setup

 

*** DROOL DROOL DROOL ****

 

if you cant host em send em to me & i will host em, resize them first please

[MaritimeMan]

You got it, I'll take them after classes, don't have a camera with me, and need to go get align done, class at 1230. Check in tonight.