brix542 Posted May 26, 2010 Share Posted May 26, 2010 Hey ive been looking for some new tires cause mine are almost bald. One of my friends said he'd sell me his bfg mud terrian t/a's for $130 a tire. He said they were 31x14.50x15 and they look like they have 3/4 tread left. Would these fit a 94 pathy if i had a 3 in body lift? What size rim would be good for these and how much would they be ea? Thanks Link to comment Share on other sites More sharing options...
GrimGreg Posted May 26, 2010 Share Posted May 26, 2010 14.50? I wouldn't go that wide unless you have upgraded steering components, or SAS. Link to comment Share on other sites More sharing options...
Dowser Posted May 27, 2010 Share Posted May 27, 2010 (edited) Id say 13.5 absolute max with a 3" suspension lift, a "3 inch body lift and proper wheel size with the correct Backspacing/offset. 88pathoffroad had them when he picked up his interco LTB's and he said they would JUST stuff in the fenders. Mind you he also had a bomber steering set up so I wouldnt touch that option until you get your steering sorted out. Edited May 27, 2010 by Dowser Link to comment Share on other sites More sharing options...
ahardb0dy Posted May 27, 2010 Share Posted May 27, 2010 BF Goodrich does not make a 14.50" tire in a 31", you would have to go up to their 36,39.40 or 42" tires to get a 14.50" Link to comment Share on other sites More sharing options...
Kingman Posted May 27, 2010 Share Posted May 27, 2010 That size doesn't sound right... Link to comment Share on other sites More sharing options...
brix542 Posted May 27, 2010 Author Share Posted May 27, 2010 I'm not sure bout the size. Like i said thats what he told me. Im going to look at them today and find out the real size. Link to comment Share on other sites More sharing options...
silverton Posted May 27, 2010 Share Posted May 27, 2010 They are probably just 31x10.50 as that is the most common. Which would fit. Link to comment Share on other sites More sharing options...
brix542 Posted May 27, 2010 Author Share Posted May 27, 2010 They are a 325/60r15 which converts to a 30.4x12.8x15. He said 13 to begin with then change to a 14.5 so must have just got confused. Would they fit stock or how much lift would i need? Link to comment Share on other sites More sharing options...
GrimGreg Posted May 27, 2010 Share Posted May 27, 2010 They should fit at stock height, but might rub the frame or the rear edge of the front fender when turning depending on the wheel used. Link to comment Share on other sites More sharing options...
brix542 Posted May 27, 2010 Author Share Posted May 27, 2010 Im planning on using crager black bullet holes 15x10 6 on 5.5 and 4" backspacing for $60 ea from summit. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now