Where Do I Find

[jeremyelvis]

where could i find a rear bumper relocation kit for a 3 inch body lift? i got tired of looking at the odd spot on the back of my pathy and want to buy somthing to help it. or would io have to fab one myself?

[ahardb0dy]

have to make one yourself for the rear

[GrimGreg]

Most of us just relocate it using different holes in the frame and bumper brackets.

 

[Cuong Nguyen]

^^^What Greg did. side note your frame is looking rough!

[ahardb0dy]

on an aftermarket bumper it would be easier, when I had the smittybilt double tube rear bumper on my D21, I had the one with the 2" receiver, I found a pair of brackets for a non hitch double tube bumper also from smittybilt, the non hitch bumper brackets bolted on to the bumper, the hitch bumpers the brackets were welded to the bumper, anyway the pair of brackets I found had the exact contour of the one's that were welded on, so we just placed them under the hitch bumper brackets and welded them on really good, than raised the bumper 3" and had a complete set of holes that lined right up. It was still strong as I still could tow or pull stuck trucks out with it.