EmptyV Posted June 5, 2009 Share Posted June 5, 2009 So here's the setup 2001 QX4 2WD KYB GR2's EMO HD springs for front and rear NX4 1" Spacers with welded extended bolts 1" Rear Coil spacers. So my goal is to get a 3" lift out of this. I figured since there is no front differential I won't get the tow truck look so might as well add another inch on each end. My buddy is hooking up a garage for us to do this in and he asked if I need to change my pinion angle and if so how many degrees? Thanks! Billy Link to comment Share on other sites More sharing options...
FUELER Posted June 5, 2009 Share Posted June 5, 2009 Congrats, sounds like fun. Do you have the parts already? Pinion angle is not adjustable on a R50. Your rear driveshaft and pinion will be just fine. You might need camber kit in the front though. Just lift it, align it, and run it! Link to comment Share on other sites More sharing options...
180sx Posted June 6, 2009 Share Posted June 6, 2009 baja Style, son!!! Link to comment Share on other sites More sharing options...
EmptyV Posted June 6, 2009 Author Share Posted June 6, 2009 Congrats, sounds like fun. Do you have the parts already? Pinion angle is not adjustable on a R50. Your rear driveshaft and pinion will be just fine. You might need camber kit in the front though. Just lift it, align it, and run it! Thanks I'm pretty stoked. I got the last of the part last week, the only thing we need now is the garage which should be next weekend. Then I travel down the dark road of tires and rims, at least I know what I want. How are you liking your setup so far? Do you know what your total hight is? The only thing I'm worried about is fitting in parking garages. Billy Link to comment Share on other sites More sharing options...
01silvapathy Posted June 6, 2009 Share Posted June 6, 2009 Put up pics when you are done. Where in so-cal are you? Link to comment Share on other sites More sharing options...
FUELER Posted June 7, 2009 Share Posted June 7, 2009 no dont worry about parking garages, I got about 1.5" all around from the springs alone. Good luck and get that lift installed! Link to comment Share on other sites More sharing options...
Fukinitupagain Posted June 7, 2009 Share Posted June 7, 2009 Yeah get the lift installed & post some pics. You've been talking about this for a while, so congrats. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now