Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

Which Tow Hitch


Mobbs
 Share

Recommended Posts

Are the rear tie down hooks easy to remove? It says i will have to remove them when installing my hidden hitch. Are these those two big metal hooks at the rear right and left side? If so they seem solid, any suggestions on how to remove them?

 

Never Mind found out it was just 3 bolts on each side.

Edited by Mobbs
Link to comment
Share on other sites

Yeah, on my 02 the tow hitches were an easy three nolt removal... You may need to clean up the threads of the nut that did not have bolt in it originally (I did). I didn't have the correct size tap, so I cut some slots in one fo the old tow plate bolts with a die grinder and then deburred it on the wire wheel. Made a great make-shift thread cleaning tool. Just spray some lube in the nut first.

 

IIRC, Hidden Hitch, Draw-Tite and Reese are all the same company now, so be careful when comparison shopping.

 

If anything like my 02, you need a harness module as the brake and turn signal circuits are separate. The harness kit makes the wiring dead easy though.

Edited by BowTied
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...