json3904 Posted March 31, 2008 Share Posted March 31, 2008 i attempted a mud bog that nobody else wanted to hit.... now the pathy needs alot of motor work, i have a seal that is pouring oil and it starts knocking at high idle.... here are some of the pics..... Link to comment Share on other sites More sharing options...
json3904 Posted March 31, 2008 Author Share Posted March 31, 2008 Link to comment Share on other sites More sharing options...
json3904 Posted March 31, 2008 Author Share Posted March 31, 2008 Link to comment Share on other sites More sharing options...
GrimGreg Posted April 1, 2008 Share Posted April 1, 2008 Besides a motor you need a real rear recovery point. Did you get the motor into the thick mud? Things that spin well in open air tend to get angry trying to spin in mud. Link to comment Share on other sites More sharing options...
json3904 Posted April 1, 2008 Author Share Posted April 1, 2008 yes it was running in the mud.... i am going to try to pull the pully and look at the seal..... the rear bumper is on my list but i need to get her running right first.... Link to comment Share on other sites More sharing options...
TrailChaser Posted April 1, 2008 Share Posted April 1, 2008 Nice pics... I had a good time out there in the mud. Link to comment Share on other sites More sharing options...
json3904 Posted April 1, 2008 Author Share Posted April 1, 2008 they are talking about going back mem day weekend.... i dont think the pathy will be ready but i might go..... Link to comment Share on other sites More sharing options...
MY1PATH Posted April 1, 2008 Share Posted April 1, 2008 I'm new to this, don't laugh, how did the mud cause a seal to fail. did the mud to the damage to the engine or the burden of a forced dead stop cause stuff to go bad in the engine? Link to comment Share on other sites More sharing options...
LandShark Posted April 1, 2008 Share Posted April 1, 2008 Looks like you guys had fun, aside from this mud hole. Hope ya get that thing running again soon Jason. Link to comment Share on other sites More sharing options...
json3904 Posted April 1, 2008 Author Share Posted April 1, 2008 there was no abrupt stop... i as all the way at the end and only had a few feet to go i got boged down so i backed up to hit it again and got stuck..... i really dont know how it made the seal fail but i know it wasnt leaking before i took it in that pit and now it is...... i will take a couple of pics so yall can tell me what seal i need... Link to comment Share on other sites More sharing options...
Casey.T Posted April 1, 2008 Share Posted April 1, 2008 Nice pics... I would have hit that hole as well... clean the mud off, fix it and head back out to beat that little mud pit.... I hit something similar in the 95... did not make it... went back later that evening in the 91 just to beat it... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now