trtturbo Posted March 27, 2008 Share Posted March 27, 2008 '89 Pathy; alarm will not turn off. No remote, just the little switch below the radio. Is there a fuse just for it or any other way to keep it from going off. I followed the owners manual, and it was no help. Link to comment Share on other sites More sharing options...
robert Posted March 28, 2008 Share Posted March 28, 2008 Put key in ignition and turn on... Shuts right off Link to comment Share on other sites More sharing options...
trtturbo Posted March 28, 2008 Author Share Posted March 28, 2008 I know that. It just goes off all the time. Like if I open the door to get something out and shut it and lock it, it goes off. Link to comment Share on other sites More sharing options...
unccpathfinder Posted March 28, 2008 Share Posted March 28, 2008 clip the speaker in the engine compartment or the power supply to the alarm...just makes ure the locks still work Link to comment Share on other sites More sharing options...
bigfisch1191 Posted March 28, 2008 Share Posted March 28, 2008 yea my stock alarm never worked but the other day my lights started flashing and i figured it was the old stock alarm going off. Link to comment Share on other sites More sharing options...
NaturaTek Posted March 30, 2008 Share Posted March 30, 2008 On the dashboard (left of the steering wheel, at least on mines), theres a tiny switch. 3 settings, alarm on, impact off and off. Try a few see if it helps you. Link to comment Share on other sites More sharing options...
88pathoffroad Posted March 31, 2008 Share Posted March 31, 2008 I have the owner's manual for that available for download... Found it in a junkyard glove box. http://nissan.damagedreality.com/vssmanual...anVSSmanual.zip Link to comment Share on other sites More sharing options...
88pathoffroad Posted March 31, 2008 Share Posted March 31, 2008 By the way, mine was doing the same thing for quite some time, going off by itself and whatnot...pulled up the carpet on the driver's side under the seat and what do you know, a heavily corroded ground wire for the alarm. Fixed that and it's worked perfectly ever since. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now