Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

Lighting/KC etc..?


drifter
 Share

Recommended Posts

I want to install some lights,KC, rally style etc.. on my front bumper 94 path , I need better lighting and i dont want to intstall a bumper guard. Anybody have this set up ? and what are the best type/brand lights to go with? any pictures ???

Link to comment
Share on other sites

  • 1 month later...

I have got 2 pair of Hella 500's on my truck, cost me $60 a pair, they work excellent, although I never had any other brand. :unsure:

hhttp://npora.ipbhost.com//style_images/1/folder_attach_images/attach_add.png

http://npora.ipbhost.com//style_images/1/f...tach_add.pngave

post-4744-1202993841.jpg

Edited by Paffphinder1989
Link to comment
Share on other sites

I have got 2 pair of Hella 500's on my truck, cost me $60 a pair, they work excellent, although I have never had any other brand. :unsure:

 

yeah i went out and bought the hell 500's as well , happy with them too.

Link to comment
Share on other sites

i go with el cheepo lights so that way im not mad when they get cracked from road debris....i think i paid $40 for both of these at your local auto parts store. they are 100W 6"

 

yea001.jpg

i made a bracket and used the round head bolts on the bumper to mout them with. NOT THE BOLTS HOLDING THE BUMPER TO THE FRAME!!! there are 2 extra bolts on either side of the liscence plate that i used. it looked good too. kept the lights about even with the bumper so it didnt block the headlight spread or the radiator

 

i now have 4 of em set up on my brush guard like this:

S6300871.jpg

 

goin to a manual tranny in a few weeks so im not too worried about the little bit of radiator i blocked. also i will probably remount the top 2 lights after i put my winch on in a few weeks.

like i said i go for the $20/each lights from where ever. you can pick up a cheap relay if you dont already have one from the factory optional fog lights. i dont think my truck came with fog lights from the factory but the switch was already in my truck as were the wires and the relay. i have them straight wired through a switch to my battery for now but im gonna steal the factory relay and use that soon. just got em on for now cause i have lots more wiring/lighting to do including 2 100W "low pro" lights in rear that will come on when i engage reverse as well as an "optional" on setting thru a 3 way toggle.

 

these lights did not come with wires or relays but i have loads of wire just lying around. i make my own wiring harnesses. if your not keen to do that you may want to go with a set that will include wiring harness and a relay. i did however fuse the wire coming off the battery BTW. making your own wiring harness is pretty easy. i found that 14AWG stranded wire is easy to work with as well as sufficient size to carry the load. no problems so far :aok:

 

Rich

Edited by pathmaker1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...