tmorgan4 Posted October 22, 2007 Author Share Posted October 22, 2007 I think I'm going to take Fueler and RWC5S2 up on the shipping deal. I just priced out shipping to Canada which will differ a little depending on box size and weight but I'm trying save as much money as I can at the moment. I'm just about broke from this engine. Anyone have a Z32 flywheel laying around? I'll take one as a partial trade. I'm going to spend time tonight figuring exactly what shipping is going to cost everyone and I'll send out Paypal invoices to everyone. If for some reason I forget to include hardware in your invoice let me know and I'll change it. I need to go back and read all the old PMs to figure out who wants it. Link to comment Share on other sites More sharing options...
Orangetang Posted October 22, 2007 Share Posted October 22, 2007 I think I'm going to take Fueler and RWC5S2 up on the shipping deal. I just priced out shipping to Canada which will differ a little depending on box size and weight but I'm trying save as much money as I can at the moment. I'm just about broke from this engine. Anyone have a Z32 flywheel laying around? I'll take one as a partial trade. I'm going to spend time tonight figuring exactly what shipping is going to cost everyone and I'll send out Paypal invoices to everyone. If for some reason I forget to include hardware in your invoice let me know and I'll change it. I need to go back and read all the old PMs to figure out who wants it. Or I could take the same discount as Fueler Whatever works for you guys. I might be in Edson, AB for a few days unless the snow keeps falling or it turns to rain. I'll try to check my messages at whatever hotel I'm at. Link to comment Share on other sites More sharing options...
FUELER Posted October 22, 2007 Share Posted October 22, 2007 Snow??? It's like 90 degrees here, humidity is 0, and theres ash and smoke in the air..... Link to comment Share on other sites More sharing options...
Orangetang Posted October 22, 2007 Share Posted October 22, 2007 Yeah, it's warming up again, but we were below 0C for a few days. We even got a little snow in September. Not long until the average day is -20C or (-4F I think), and the block heater is running every night. I start to get grumpy when it's below -30C. Link to comment Share on other sites More sharing options...
FUELER Posted October 23, 2007 Share Posted October 23, 2007 (edited) Where do you live?? North Pole? I would love to live in cold weather like that. Lets trade places, but only for a week. Edited October 23, 2007 by FUELER Link to comment Share on other sites More sharing options...
Orangetang Posted October 23, 2007 Share Posted October 23, 2007 Grande Prairie, AB at the moment. West and a little North of Edmonton and right next door to Dawson Creek, BC. Link to comment Share on other sites More sharing options...
tmorgan4 Posted October 30, 2007 Author Share Posted October 30, 2007 If the hardware will ever arrive I can get these thing shipped out! Link to comment Share on other sites More sharing options...
FUELER Posted October 30, 2007 Share Posted October 30, 2007 Sweet. Link to comment Share on other sites More sharing options...
RWC5S2 Posted October 30, 2007 Share Posted October 30, 2007 Sweet. Oh, sure. It's the hardware's fault. lol...............looking pretty good. Link to comment Share on other sites More sharing options...
tmorgan4 Posted October 30, 2007 Author Share Posted October 30, 2007 Actually ACE's fault for not having it, and now the internet's fault for taking so long to get them here! Link to comment Share on other sites More sharing options...
trogdor Posted October 30, 2007 Share Posted October 30, 2007 Those are nice looking spacers. Link to comment Share on other sites More sharing options...
Orangetang Posted November 1, 2007 Share Posted November 1, 2007 Very nice! I can't wait to get this thing sitting level. Link to comment Share on other sites More sharing options...
BlackBeautyPathy Posted November 2, 2007 Share Posted November 2, 2007 hey, sorry to hop in on this discussion, I have the AC 2" lift, do I want these for my truck? or is this just for after the prado lift? Link to comment Share on other sites More sharing options...
FUELER Posted November 3, 2007 Share Posted November 3, 2007 I have the AC 2" lift, do I want these for my truck? It all depends, do you want an extra 1" of lift?? 3" total instead of 2" total? This is what a Pathfinder looks like with the 2" AC springs + 1" spacer Link to comment Share on other sites More sharing options...
SnowSurfLax Posted November 3, 2007 Share Posted November 3, 2007 That's hot! I'd do it if it wouldn't be counteractive to my currnet goals. I'll have to wait until it's my weekend warrior. Link to comment Share on other sites More sharing options...
RWC5S2 Posted November 3, 2007 Share Posted November 3, 2007 Hey Tyler. How goes the battle. If it makes a difference I can buy my own hardware, just need the proper size info so I get the correct length bolts, etc. The spacers look most excellent. My Pathy is anxious to get her "nose job". Link to comment Share on other sites More sharing options...
tmorgan4 Posted November 3, 2007 Author Share Posted November 3, 2007 These things are ready to ship. I got the hardware I ordered, but the 3/8" lock washers somehow got left out. I picked those up this morning and we're ready to roll. These will be going out Monday and everyone can expect UPS tracking numbers as well as invoices (if you owe money). Thanks so much to everyone for being patient. This project has gone about as unsmoothly as possibly! Link to comment Share on other sites More sharing options...
RWC5S2 Posted November 3, 2007 Share Posted November 3, 2007 These things are ready to ship. I got the hardware I ordered, but the 3/8" lock washers somehow got left out. I picked those up this morning and we're ready to roll. These will be going out Monday and everyone can expect UPS tracking numbers as well as invoices (if you owe money). Thanks so much to everyone for being patient. This project has gone about as unsmoothly as possibly! I must put you in for Sainthood consideration after going thru all this mumbo jumbo. Major thanks to you for doing it. Link to comment Share on other sites More sharing options...
tmorgan4 Posted November 8, 2007 Author Share Posted November 8, 2007 5 of the 7 boxes of spacers have been shipped. I had a problem with one of them going to Canada through UPS (Royal PITA!!!) and need to run it by the post office. One of you guys who didn't order hardware actually got a set...I'm not sure myself who it was though. We'll just consider it a raffle as a thanks to everyone for waiting patiently. I came up one set short in the end and figured it's packed up in one of the boxes. I'm hoping to get everyone their tracking numbers tomorrow and probably send out invoices at the same time. Link to comment Share on other sites More sharing options...
RWC5S2 Posted November 8, 2007 Share Posted November 8, 2007 5 of the 7 boxes of spacers have been shipped. I had a problem with one of them going to Canada through UPS (Royal PITA!!!) and need to run it by the post office. One of you guys who didn't order hardware actually got a set...I'm not sure myself who it was though. We'll just consider it a raffle as a thanks to everyone for waiting patiently. I came up one set short in the end and figured it's packed up in one of the boxes. I'm hoping to get everyone their tracking numbers tomorrow and probably send out invoices at the same time. Hi Tyler. I will be out of town until Sunday. I shall render payment upon my return. Thanks again for getting them done. Link to comment Share on other sites More sharing options...
norcalpathy Posted November 8, 2007 Share Posted November 8, 2007 (edited) I just sent you payment! Can't wait for these to arrive. I am slowly getting parts for my Pathy's transformation. Edited November 8, 2007 by norcalpathy Link to comment Share on other sites More sharing options...
norcalpathy Posted November 13, 2007 Share Posted November 13, 2007 Bumped. Link to comment Share on other sites More sharing options...
RWC5S2 Posted November 13, 2007 Share Posted November 13, 2007 WOO HOO! UPS just delivered the spacers and they are awesome. Tyler, thanks for a job well done. Link to comment Share on other sites More sharing options...
Orangetang Posted November 22, 2007 Share Posted November 22, 2007 Picked them up on Tuesday evening, and drove to work to install them. After removing the strut and banging out the old studs I noticed there is no way the get longer bolts in there without disassembling the whole thing, OR welding some nuts to the bottom of the mount or something... What did the rest of you do? I put everything back together and drove down to Calgary last night, so I won't be attempting an install for a few days at the earliest. Also seems the strut bearings are sitting weird in there. I'll post pics next time. Link to comment Share on other sites More sharing options...
nissandoms47 Posted November 22, 2007 Share Posted November 22, 2007 you have to disassemble it to get the longer bolts in. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now