Back spacing

[Hud]

I bought some 15x8 MT Classic's and the backspacing is 4.25....

 

Anyway it rubs just about everytime I turn and especially when I'm wheelin and bouncing and turning..

 

Any suggestions other than the obvios of a lift...?

 

i also maxed out my T-Bars but I think they are bad because the front end keeps lowering through time..

 

Thanks

[aries247]

most people are running 4.0" backspace i believe 4.25 is too much.

[RedPath88]

If it is only rubbing at the extreme right or left (all the way in either direction) you may be able to adjust the steering stops to prevent the tire from rubbing.

[88pathoffroad]

31's can rub the front fenders even with stock wheels. Trim the fenders or flares to eliminate rubbing. It's a part of offroading...

[gxl90rx7]

most people are running 4.0" backspace i believe 4.25 is too much.

the less backspacing you have, the further your wheels will stick out, the more it will rub on the fender flares. I have 15x8 with stock backspacing (4.75") and 31" tires, no lift, and it doesnt rub any after trimming the flares a little

[SteeevO]

3.75" BS and 30's....no trimming..no rubbing